Make | Model | Problem | Solution | Date |
| | | |
Found: 9
|
Bush | 1433/1434/1435 | Dead | Q801 chopper s/c, R809 surge lim o/c, also replace R804, 805 & IC801 | 14-09-04 |
Bush | 1434 | Dead | IC801 TDA4605-3 (must have suffix), R805 330k.Q801 BUZ77B and R809 .47ohm | 14-09-04 |
Bush | 1434 | Dead - BU808DF1 faulty but runs hot on replacement | C602 in Trs base cct faulty | 14-09-04 |
Bush | 1434 | No start up | Q801 BUZ90; 1w 330k resistor risen in value | 14-09-04 |
Bush | 1434 11AK20M-3 | Int tuning - no sigs | resolder SMD`s around R584 / R521, located on underside of PCB near IC501 | 14-09-04 |
Bush | 1434 11AK20M-3 | Shuts down with ticking noise | D604 BA157 s/c | 14-09-04 |
Matsui | 1434 190 series | Dead - pri HT present | PSU chip TDA4605/3 | 14-09-04 |
NordMende | 1434 | Colour - strips of colours across screen. | CL26 ( 10uf 250v ) | 14-09-04 |
Philips | 29PT8434 | Correction to position 21 of styling 220 | Correction to position 21 of styling 220 of Product Survey 1999-3 (3122
785 10300
The code numbers mentioned for the aluminium columns at position 21 of
styling 220 are not correct. The correct code numbers must be:
21 4822 466 12216 Aluminium colum | 14-09-04 |