Make | Model | Problem | Solution | Date |
| | | |
Found: 8
|
Goldstar | CB14A80E | Reduced width. 6-8 volts on supply pin of TDA8362 | Replace TDA8362. Supplying +12V to supply pin of TDA8362, restored width but with no hor. Synchronization. | 14-09-04 |
Goldstar | CB14A80E | Reduced width. 6-8 volts on supply pin of TDA8362 | Replace TDA8362. Supplying +12V to supply pin of TDA8362, restored width but with no hor. Synchronization. | 14-09-04 |
Goldstar | CB14A80E | Relay goes on, then off, immediately after switch on | Change memory chip St24C02C. | 14-09-04 |
Goldstar | CI21A80 etc | Won't come on from st/by | May be in child lock - use r/c to sw on | 14-09-04 |
Philips | 28PW6324/05R SA8.0E | Dim raster with sound RGB o/p chip on crt base overheating | Tapping crt neck brought back pic - crt faulty | 14-09-04 |
Philips | A8.0E 24PW6324/05R | Tuning slightly high when locks on to a station in search tune | TDA8843 jungle chip faulty - has AFC feedback incorp in it | 14-09-04 |
Philips | A8.0E 32PW6324/05 | St/by only | Could be micro IC7000 pt no 311125054411 & memory chip IC7088 pt no 482220914928. Note option code on CRT label & change it in service menu then in serv align menu (SAM) adj geometry | 14-09-04 |
Philips | W66ESF02X14 A8.0EAA | Dead with red LED flashing & smell of burning | C2633 1500pF 2kv by side of LOPTx burnt | 14-09-04 |