Make | Model | Problem | Solution | Date |
| | | |
Found: 8
|
Hitachi | C2514T | Blank raster - all controls at zero | R068 had never been soldered | 14-09-04 |
Hitachi | C2514T | Dead - ZD952 P6KE180A zener s/c | R951 82k has gone high in value | 14-09-04 |
Hitachi | C2514T | Int trips into st/by esp on vcr chan | R951 & R953, Both 82k 1w - going high | 14-09-04 |
Hitachi | C2514T | NO PICTURE OR SOUND ALL CONTROLS SET TO "0" AND SE | R086 D/J | 14-09-04 |
Hitachi | C2514T | psu blown | R951 82k .5w could be cause of BUT12AF & ZD952 s/c & opto coupler IC901 faulty | 14-09-04 |
Hitachi | C2514TE | Dead - no st/by LED | No 5v rail - check R097 82R & Q003 BC548 - either 1 or other fitted | 14-09-04 |
Hitachi | C2514TE | St/by only aft trying to start | Replace IC601 TA8427K C604 100UF/63V O/C and 100UF/63V that is soldered directly to the pins (print side) of IC601.This one was high ESR | 14-09-04 |
Hitachi | C2514TE | Weak vid/hiss only in AV mode OK in normal | Q005/007 2SC3413 rh of scart skt faulty | 14-09-04 |