Make | Model | Problem | Solution | Date |
| | | |
Found: 10
|
Grundig | CUC6330 | E/Wfaulty with burning smell | Check R569 for o/c (6R8?), TDA8145 E/W chip - cause dry joint C567 | 14-09-04 |
Grundig | CUC6330 | E-W faulty & narrow pic | R569 4.7R o/c (next to E-W chip TDA8145) | 14-09-04 |
Grundig | CUC6330 | Greenish blank raster with fb lines | No SDL SDA activity - s/c on o/p of IR Rx | 14-09-04 |
Grundig | CUC6330 | greenish blank raster with fb lines - no oSD | no clock pulses on IC811 proc. - s/c on IR Rx o/p IC84001 on front panel | 14-09-04 |
Grundig | CUC6330 | Hotel mode removal | Switch set off, and whilst holding the "i" button switch set on. On screen display gives option of hotel on/off, select off. | 14-09-04 |
Grundig | CUC6330 | Negative looking pic - ok with scart I/p - in wrong standard | In menu set standard (s) to '2' & store with 'OK' key | 14-09-04 |
Grundig | CUC6330 | No Luminance | There is no luma output from filter F120 SFB4595 (part number 8140-601-600) | 14-09-04 |
Grundig | CUC6330 | No pic - crt internal arcing - focus volts too high | LOPTx faulty (Konig FAT30329) | 14-09-04 |
Grundig | CUC6330 | Sync? Reduced line pulse | R176 hi res in flywheel timebase | 14-09-04 |
Grundig | CUC6330 | Tripping | D569 BY228 leaky (next to LOPTr) | 14-09-04 |