Make | Model | Problem | Solution | Date |
| | | |
Found: 6
|
Decca | DBS9892C | Int dead | Dry joints scart conn (12v routed thro it)- remove Nicam pcb | 14-09-04 |
Decca | DBS9892C | Int dead | Dry joints RA50 & RA16 3w stand up res on audio o/p panel & check joints on 12v reg on main pcb | 14-09-04 |
Decca | DBS9892C | Int sw off | Dry joints on Audio o/p pcb (12v goes in & out of this panel) & check joints on main pcb (esp regs) & to scart board. Also check/replace R817/819 220R ?w in pri psu & C812 100mfd, C807 100mfd & C806 100mfd | 14-09-04 |
Decca | DBS9892C | No startup | R817 & R819 in the primary PSU stage (both
220R 0.5 watt) as they looked distressed & all the small caps in PSU (C812 100mfd, C807 100mfd & C806 100mfd) | 14-09-04 |
Decca | DBS9892C | Thumping noise on audio | dry joints audio pcb | 14-09-04 |
Decca | DBS9892C | Verticals ragged when cold | C418 470µ 35v o/c between T401 & SCART pcb | 14-09-04 |