Make | Model | Problem | Solution | Date |
| | | |
Found: 12
|
ITT | EuroMono | Blank raster with flyback lines. | No 185v to CRT base , 5R56 ( 4.7R saftet ) o/c. | 14-09-04 |
ITT | EuroMono | Int picture floods red with flyback lines. | IC1002 ( TEA5101A ) on CRT base. | 14-09-04 |
ITT | EuroMono | No colour. | 13IC04 ( Tvp02066 Em0302 ) Pt No.3779-12-24 ) | 14-09-04 |
ITT | Euromono 2 | Lack of height from cold | 6C10 220µ 35v | 14-09-04 |
ITT | FX5532 Euromono | Lack of height from cold ( about 1 inch ) , clearing | 6C10 ( 220UF , 35V ) in the flyback boost voltage generator network associated with the TDA8170 field output chip 6IC02. | 14-09-04 |
Nokia | 21S4C Euromono | Sigs int | OC38 1000uF 16V, OC44 1000uF 16V and OC40 100uF 25V | 14-09-04 |
Nokia | 6332 Euromono 110' Chassis | Random thick black spots in picture, varying in shape and size according to picture contrast and brightness. | Replace SMD transistor 4T06 (BC858) next to U4647 chip. | 14-09-04 |
Nokia | 6332 Euromono 110' Chassis | Random thick black spots in picture, varying in shape and size according to picture contrast and brightness. | Replace SMD transistor 4T06 (BC858) next to U4647 chip. | 14-09-04 |
Nokia | 7142 Euromono 2 | Flyback lines after fitting Konig FAT 30091 LOPTx | 1) adjust H sync 2) fit 1nF 5C40 3) remove 5C17 (12pF) & fit 22K res in 5C17's place | 14-09-04 |
Nokia | Euromono | Dead - EHT starts to rise at sw on, no led | OC44 1000µ16v in 8v supply | 14-09-04 |
|
Nokia | Euromono 2 6332 | Field - 3 coloured lines at top of screen | 6D04 1N4002 leaky between pins 2 & 6 TDA8170 FOP chip | 14-09-04 |
Salora | 21S5EE Euromono2 | No start up - all psu volts present & LED lights | OC44 (1000uF 16V), a good resorder on line drive circuit & 5C34 (470uF 16V) - 5C36 (220uF 35V) replaced | 14-09-04 |