Make | Model | Problem | Solution | Date |
| | | |
Found: 5
|
Philips | L9.1 25PT4475 | sound int. goes off or no sound when warm | resolder Xtal 14MHz located next to pin 64 IC1822 | 14-09-04 |
Philips | L9.1A | Set in protection mode. After entering SDM mode LED blinking (3x) | Check and replace if necessary IC 7401 (TDA9302H; 4822 209 13176) and add an additional capacitor of 220nF 100V (4822 121 42868).
Solder the capacitor between pins 3 & 4 of position 7401 or between the ground of position 2403 and position 3491.
See att | 14-09-04 |
Philips | L9.1E | Flickering of video signal during yellow picture content | Add a capacitor of 1nF (5322 126 10511) parallel to capacitor 2221 on the
family board.
IRIS CODE : 341X | 14-09-04 |
Philips | L9.1E | TXT hold function doesn't work. | Check and replace if necessary position 7600 on the mono-carrier by 9352
672 22112 (L90EF1-1.9).
IRIS CODE : 177X | 14-09-04 |
Philips | L9.1E 25PT4475 | No sound aft tuner replacement | Check option bytes in serv mode (enter by pressing 0,6,2,5,9,6,& menu) option SB incorrect | 14-09-04 |