Make | Model | Problem | Solution | Date |
| | | |
Found: 6
|
Bush | WST Professional 4400 series | Service Mode access | hold menu button while turning CTV on until the red LED lights up. Release the menu button and press standby. | 14-09-04 |
NEI | 200 Indiana 200 | Field short & jumps | D001 - replace with ZTK33 | 14-09-04 |
NEI | 2051TX Indiana | Dead | Dry joints on small coil near chopper Tr marked D805 on underside of board. Was glued in | 14-09-04 |
NEI | 2151 ( Indiana 10 Indiana | Bright raster and flyback lines. | R73 1 on the CRT base panel was open-circuit , removing the supply to the RGB output stages with this fault you sometimes have | 14-09-04 |
Perdio | 2102 Indiana 100 | No pic - sound ok | R605 5k6 o/c | 14-09-04 |
Sanyo | C25G65BNA | Trips int when cold | C 655 100uf @ 10V, C 651 470uf @ 16V | 14-09-04 |