Make | Model | Problem | Solution | Date |
| | | |
Found: 7
|
Philips | NC3-CR | Horizontal striations over screen. | C2413 ( 100uf , 400v ) o/c. | 14-09-04 |
Philips | NC3-CR | Motorboating at first then a green raster. | Regulator 78M05 5v , check C2483 for dry joint. | 14-09-04 |
Philips | NC3CR | Dead - went bang - print blown off PCB. | Drys on mains on/off switch. | 14-09-04 |
Philips | NC3CR | Distorted sound | R416 6.8R in 22v supply | 14-09-04 |
Philips | NC3CR | Motorboating - green raster. | C2483 dry if so it may have damaged 78M05 5v reg. | 14-09-04 |
Philips | NC3CR | No sound or picture after half hour. | CNX62 optocoupler. | 14-09-04 |
Philips | NC3CR | Will not come out of standby - after new sw. | Low s/by contacts remain connected as long as mains do. | 14-09-04 |