Make | Model | Problem | Solution | Date |
| | | |
Found: 10
|
Panasonic | Euro 2S TX29AD2DPB | Blank greenish raster with lines at top lh side - sound ok | IC601 VDP3108APPA1 jungle IC (42.22UKP) | 14-09-04 |
Panasonic | Euro 2S TX29AD2DPB | Burst of eht at switch on then trips off after about 7 secs with frame collapse visible just as it went off | IC601 VDP3108APPA1 jungle IC (42.22UKP) | 14-09-04 |
Panasonic | EURO2S TX29AD2DP | in autosearch won't store BBC1/BBC2 | BBC changed channel No ID, replace EEPROM IC1871 with new software (27C010A09C) | 14-09-04 |
Panasonic | EURO2S TX29AD2DP | int. horizontal black lines from top to bottom of screen | D507/D508 MA723TA5 leaky | 14-09-04 |
Panasonic | EURO2S TX29AD2DP | no audio, faint noise from all speakers in all modes (tuner and AV) | replace IC1301 MSP3410-15TV (multisound processor) | 14-09-04 |
Panasonic | EURO2S TX29AD2DP | no sound from centre or rear speakers (only quiet hum) | the +19V line down to +10V, replace IC2505 TDA2030AV , also check IC2506/IC2517 | 14-09-04 |
Panasonic | EURO2S TX29AD2DP | no surround sound | IC506 TDA2030 | 14-09-04 |
Panasonic | EURO2S TX29AD2DP | won't go to stby, sound mutes and odd row of dots float down screen | replace relay RL6001 (TSE10818) on front control PCB | 14-09-04 |
Panasonic | TX29AD2DP | No sound | Replaced output chip IC466 (LA4282) and safety resistor R688 (0.1R), but still no audio reaching the output chip. Replace IC2513 (SC442013B) on the DSP board - IC466 is the cause | 14-09-04 |
PANASONIC | TX29AD2DP | NO SOUND FROM CENTRE OR SURROUND SPEAKERS | REPLACE IC205 TDA2030A | 14-09-04 |