Make | Model | Problem | Solution | Date |
| | | |
Found: 7
|
Ferguson | TX86 | Coil L10 burnt up. | Change the coil to a fusible resistor 0.33ohm 5% , 0.5W. | 14-09-04 |
Ferguson | TX86 | Dead - blowing Line transistor TR13 | Check the leads of C72 are not s/c. | 14-09-04 |
Ferguson | TX86 | Int dead , 12v supply goes missing | dry joints volts reg on remote pcb | 14-09-04 |
Ferguson | TX86 | Line collapse. | Dry on 330nf C94. | 14-09-04 |
Ferguson | TX86 | LOW HEIGHT | R62 OC ( 27ohm ) | 14-09-04 |
Ferguson | TX86 | Reduced frame. | Change R116 from 8.3R to 6.8R 0.25W. | 14-09-04 |
Ferguson | TX86 | Trips as tho' loptx faulty | Mains smoother o/c | 14-09-04 |