Make | Model | Problem | Solution | Date |
| | | |
Found: 6
|
Grundig | CUC5350 CUC5360 | "P1" DISPLAYED AFTER PROCESSOR CHANGED | R836 FROM 10K TO 22K ( OLD SDA 20562 A 006 NEW SDA 20562 A 506 Grundig 8305-157-580 ) | 14-09-04 |
Grundig | CUC5360 | No NICAM sound - whistle on mono sound | MSP2400 chip in IF module | 14-09-04 |
Grundig | CUC5360 | Col int | Replace 4.43Mhz red trimmer | 14-09-04 |
Grundig | CUC5360 | int tuner | check for dry joints on xtal | 14-09-04 |
Grundig | CUC5360 | No vid via scart skt | Sw carried out in tuner/IF chip. Check CT2512/3/4/7 sm types BC848/858 | 14-09-04 |
Grundig | CUC5360 | Store ,tuning , analogue controls inoperative | Check memory Ics IC847/8 also bad earths which could be cause of Ics going faulty | 14-09-04 |