| Service Manuals | Cables & Connectors |
Information about cable, connector or adapter : Ethernet 10/100 base-T RJ45
Ethernet 10/100 base-T RJ45
Originally developed by :
Copyright :
Source :
Category : All cables and connectors > Connectors > Computer > Networking >
Added to database : 2005-10-30 23:46:46
Description : Ethernet 10/100 base-T
RJ45 FEMALE CONNECTOR at the network interface cards/hubs
RJ45 MALE CONNECTOR at the cables
Pinout :
| Pin | Name | Direction | Color | Description |
| 1 | Tranceive Data+ | white and orange | ||
| 2 | Tranceive Data- | orange | ||
| 3 | Receive Data+ | white and green | ||
| 4 | -- | -- | ||
| 5 | -- | -- | ||
| 6 | Receive Data- | white and blue | ||
| 7 | -- | -- | ||
| 8 | -- | -- |
Note : T568A and T568B are the two color codes used for wiring eight-position RJ45 modular plugs. Both are allowed under the ANSI/TIA/EIA wiring standards. The only difference between the two color codes is that the orange and green pairs are interchanged. T568A wiring pattern is recognized as the preferred wiring pattern for this standard because it provides backward compatibility to both one pair and two pair USOC wiring schemes. The T568B standard matches the older ATA&T 258A color code and is/was(?) the most widely used wiring scheme. It is also permitted by the ANSI/TIA/EIA standard, but it provides only a single pair backward compatibility to the USOC wiring scheme.