File name Sony-TAV606 amp.pdfTA-V606/ VE610
SERVICE MANUAL
AEP Model UK Model E Model
TA-VE610
Chinese Model
TA-V606
Photo : TA-VE610
Manufactured under license from Dolby Laboratories Licensing Corporation. "Dolby", the double-D symbol a and "Pro Logic" are trademarks of Dolby Laboratories Licensing Corporation.
SPECIFICATIONS
Amplifier section
POWER OUTPUT
Inputs Sensitivity PHONO TUNER CD 2.5mV 150mV 200mV Impedance 50 kilohms 50 kilohms 50 kilohms 50 kilohms 50 kilohms 50 kilohms S/N (weighting network, input level) 75 dB* (A, 2.5mV) 82 dB* (A, 150mV) 82 dB* (A, 200mV) 82 dB* (A, 150mV) 82 dB* (A, 250mV) 82 dB* (A, 200mV)
V606 : (6 ohms 1kHz, THD 0.7 %) 110 W + 110W VE610 : (4 ohms 1kHz, THD 0.7 %) 100 W + 100W Surround mode V606 : (6 ohms at 1kHz, THD 0.7 %) Front : 110 W/ch Center* : 110 W Rear* : 110 W/ch VE610 : (4 ohms at 1kHz, THD 0.7 %) Front : 100 W/ch Center* : 100 W Rear* : 100 W/ch *Depending on the sound field settings and the source, sound will not be output. 5.1 mode V606 : (6 ohms at 1kHz, THD 0.7 %) Front : 110 W/ch Center : 110 W Rear : 110 W/ch VE610 : (4 ohms at 1kHz, THD 0.7 %) Front : 100 W/ch Center : 100 W Rear : 100 W/ch Harmonic distortion at rated output Less than 0.09% (with DIRECT PASS on) Frequency respones PHONO : RIAA equalization curve ± 0.5dB CD, TAPE, DAT/MD, VIDEO 1, 2 : +0 10Hz 50 kHz 1 dB (with DIRECT PASS on)
Stereo mode
TAPE/MD,VIDEO1, 2, 3 150mV TV/LD (AEP, UK model) 150mV TV/LD 250mV (EXCEPT AEP, UK model) 5.1 INPUT * '78 IHF Outputs 200mV
BASS BOOST TONE
VIDEO 1, 2, 3, AUDIO OUT : Voltage : 150 mV, Impedance : 10 kilohms WOOFER : Voltage : 2 V Impedance : 1 kilohms PHONES : Accepts low and high impedance headphones +10 dB at 70 Hz ± 8 dB at 100Hz and 10 kHz Continued on page 2
INTEGRATED AV AMPLIFIER
MICROFILM
Video section Inputs Outputs General System
1 Vp-p 75 ohms 1 Vp-p 75 ohms Preamplifier section : Low-noise NF type equalizer Power amplifier section : Pure-complementary SEPP AEP, Singapore, Malaysia model : 230 V AC, 50/60Hz UK model : 240 V AC, 50/60Hz Chinese model : 220 V AC, 50/60Hz 240W EXCEPT Chinese model : 1 switched, maximum 100W Chinese model : 2 switched, total 100 W 430 x 155 x 350 mm including projecting parts and controls 9.8 kg Remote commander (remote) RM-U501 (1) Size AA (R6) batteries (2)
TABLE OF CONTENTS
Specifications ... 1 1. GENERAL Location and Function of Controls ... 3 DIAGRAMS 2-1. IC Pin Function ... 5 2-2. Circuit Boards Locations ... 7 2-3. Printed Wiring Boards Surround Section ... 8 2-4. Schematic Diagram Surround Section ... 11 2-5. Schematic Diagram AMP Section ... 15 2-6. Printed Wiring Boards AMP Section ... 19 2-7. Printed Wiring Boards Display Section ... 23 2-8. Schematic Diagram |