Philips bdp7200 12 fur eng free download

File name bdp7200_12_fur_eng.pdf

BDP7200 Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: BDP7200/12 BDP7200/05 This firmware version improves: Click here for more details Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version First check your current firmware version to see if you need to upgrade: 1. Turn on the set and it will be at the HOME menu. 2. Select "Product Info" and press on the Remote Control. 3. The firmware version will be displayed on the TV screen. 4. If your existing firmware version is earlier than this version, [1.114], please proceed to step 2 Otherwise, you do not need to upgrade. Step 2 Download firmware upgrade Click the link to download the new firmware package on your computer. The package is compressed into a single ZIP archive. Step 3 Burning the firmware on CD-R / CD-RW Note: You will need one blank CD-R or CD-RW disc for this step. 1. Extract the firmware upgrade file from the ZIP archive (Do not rename the filenames) Burn the extracted file (NOT THE ZIP FILE) onto a blank CD-R or CD-RW disc, using the following settings: - File System: ISO 9660 + Joliet - Mode: 2/XA - Character set: ISO 9660 (ISO normal CD-ROM) - No multi session - Write Speed: Low Note: ZIP file will not be readable on the set 2. Finalize the discs. (The application may do this automatically.) Step 4 Upgrading the firmware of your BD player Note: Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the player may become defective. 1. Power up the BD player and eject the disc tray. 2. Place the upgrade disc on the disc tray and close the tray. 3. If the disc is recognized as an upgrade disc, the local display of player will show "UPDATE". The TV screen will show a dialog box titled "Software Upgrade" 4. Note: The BD player will indicate "Unknown Disc" in the following 2 situations. - When the software upgrade is not meant for your player (Check the applicable models above) - Problem with writing of CDR/CDRW. Try again with a different CDR/CDRW if possible. 5. To proceed with the upgrade, select "Yes" and press on the remote control. You can cancel the upgrade at this point by selecting "No" button on TV and press on the remote control. 6. If you proceed with the upgrade, the VFD will display "CHECKSW" and the TV will display "Loading Software" in the dialog box. 7. Follow the on-screen instruction to proceed software upgrade an