Philips MX39..MX5.. SW upgrade free download

File name MX39..MX5.._SW_upgrade.pdf

TYPENUMBER(S) : MX3900D, MX3910D, MX3950D, MX3960D, MX5500D, MX5600D, MX5700D INFORMATION : New Back-end firmware has been released: - BEA3131PV33 for MX3900D, MX3910D, MX3950D, MX3960D - PMK3131PV33 for MX5500D, MX5600D, MX5700D. This upgrade addresses the following issue: * German setting in system menu has no influence on default DVD playback language All older sets brought in for repair should be upgraded as preventive action. A. Preparation to upgrade firmware: 1. Unzip the zip-archive attached to this Service Newsletter 2. Start the CD Burning software and create a new CD project (data disc) with the following setting: File system: ISO9660 Format: MODE 1: CDROM Recording mode: SINGLE SESSION (TRACK-AT-ONCE), FINALIZED CD 3. Place the content of the zip-archive (1 file) into the root directory of the new CD project. 4. Burn the data onto a blank CDR Note: ISO9660 is mandatory, UDF discs are not supported ! The final CDROM must not contain any other data except the file from the zip-archive. B. Procedure to apply the firmware upgrade: 1. Power up the set and open tray 1. 2. Insert the prepared Upgrade CDROM and close the tray. 3. The set will display READING followed by DOWNLOAD 4. The TV OSD screen will show the following messages in sequence: Reading -> Update BEA -> Writing -> done 5. The whole process takes less than 2 minutes Note: Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the set may become defective. 6. Unplug & replug the mains cable 7. Open tray 1 and remove the Upgrade CDROM. C. How to read out the firmware version to confirm upgrading 1. Select Disc with the Remote Control 2. Press on the Remote control. 3. Use the cursor keys on the Remote control to navigate to "Setup Menu" -> "Sub-menu" -> "Default" 4. Press the down key one more time to see the firmware version. 6. The TV screen will show: xxxxx BEA313PV33 xxxxxx xxx REMARKS : Zip-archive file: MX3900_10_50_60_ver_bea3131pv33.zip is for MX3900D, MX3910D, MX3950D and MX3960D MX55_56_57_ver_pmk3131pv33.zip is for MX5500D, MX5600D, MX5700D except /35 version