panasonic euro9l system manual 395 free download

File name euro9l_system_manual_395.pdf

Euro 9L System Manual Euro9 Chassis Hardware Specification Version 2 24-07-02 Originator : Darren Jones (R&D) E9 Version 1 Confidential 19.10. OVERVIEW ...2 1.1 Chassis Construction (Diagram) ... 2 DP-BOARD ... (CONTINUED) 6 The main function of the HA-Board is to provide the input interface to external equipment for Digital Audio signal inputs, these are received through optical and co-axial input terminals , JK2905 (optical input) is dedicated for AV1 only , while JK2902 (optical input) and JK2903 (co-axial input) can be attributed to any AV, selectable by the customer. The co-axial input JK2903 having priority over the optical input JK2902. ... An additional optional IC2902 is available which allows for each input to independent from each other, this option is not used on Euro9. The speaker out terminals are also provided on the HA-Board which provide connection to the external satellite speakers for L and R , L and R surround and centre. An addition option is provided to allow the sub-woofer channel to be output via JK2905 by a co-axial type connector, this is not required due to an internal sub-woofer speaker being fitted inside the cabinet. ... 14 The RGB output stage is mounted onto the CRT board. Each of the 3 colour channels are fed from the DDP (pins 24~26) via Q1703, Q1704 and Q1705, which buffer and amplify the signal before it's fed through connectors A2 to L2 to the video output amplifiers IC351,IC361 and IC371 (TDA6103Q). The RGB signals are amplified before being output to the CRT, a reference voltage for the internal amplifiers is fed to pin 5 of IC351.IC361 and IC371. SVM drive is provided on the L-Board... 14 RESOURCE ALLOCATION...15 3.1 I2C bus addresses ... 15 3.2 MSP I2C Control table ... 15 3.3 DDPC I2C Control table... 22 3.4 VSP94xx I2C Control table ...