panasonic t mode1 free download

File name t_mode1.pdf

Item Player mode and Function Display Cancellation button combination method Jitter check In STOP (no disc) mode, Jitter check Press STOP press PLAY (DVD) and Jitter rate is measured and J XXX Display 1 or OPEN OPEN buttons on the displayed. Measurement is Jitter rate button. player, and "5" button on repeatedly done in the cycle of one Jitter check mode the remote control unit. second. Read error counter starts from zero upon mode setting. When Press STATUS Key target block data failed to be read to select Display 1 or 2 out, the counter advances by one increment. When the failure is caused by minor error, it may be corrected when retried to enable YYY ZZ Display 2 successful reading. In this case, the counter advances by one. When the Focus drive value error persists even after retry, the Read error counter counter may jump by two or more. Jitter rate is shown in decimal notation to one place of decimal. Focus drive value is shown in hexadecimal notation. Error code In STOP (no disc) mode, Error code check Error code (play_err) is expressed in the Cancelled check press PLAY (DVD) and The latest error code stored in following convention. automatically OPEN buttons on the EEPROM is displayed. Error code = 0 x DAXX is expressed: " nn UXX 5 seconds player, and "0" button on Error code = 0 x DBXX is expressed: " nn HXX later.