panasonic 3disassem free download

File name 3disassem.pdf

CABINET SECTION DISASSEMBLY METHOD OF CABINET SECTION Cabinet section contains following removal procedures: REMOVAL OF THE BALLAST C.B.A. AND THE TV/TUNER UNIT FROM THE CABINET REMOVAL OF THE PROJECTION UNIT FROM THE CABINET REMOVAL OF THE TUNER C.B.A., THE MAIN C.B.A., THE REAR JACK C.B.A., THE AUDIO AMP C.B.A., THE POWER C.B.A. FROM THE TV/TUNER UNIT REMOVAL OF THE SCREEN UNIT AND THE SPEAKER FROM THE DISPLAY REMOVAL OF THE MIRROR FROM THE BACK COVER REMOVAL OF THE FRONT JACK C.B.A. AND THE OPERATION C.B.A. FROM THE CABINET REMOVAL OF THE COVER SWITCH C.B.A. FROM THE CABINET DISASSEMBLY FLOWCHART This flow chart indicates the disassembly steps of the cabinet parts and the P.C.Boards in order to gain access to item (s) to be serviced. When reassembling, perform the step (s) in the reverse order. Bend, route and dress the wires as they were originally. REAR COVER FRONT COVER UNIT SPEAKER LAMP COVER OPTICAL COVER NETWORK C.B.A. PROJECTION UNIT SCREEN UNIT BALLAST C.B.A. THERMISTOR 2 C.B.A. FAN 3 UNIT MIRROR OPERATION C.B.A. TV/TUNER UNIT THERMAL FUSE UNIT TOP DUCT 3 UNIT BACK PANEL TUNER C.B.A. (DISPLAY) FRONT JACK C.B.A. MAIN C.B.A. AUDIO AMP C.B.A. REAR JACK C.B.A. POWER C.B.A. THERMISTOR 1 C.B.A. (LCD/PRISM UNIT, LIGHT IN POLARIZER, ETC) COVER SWITCH C.B.A. Note : a. Place a cloth or some other soft material under the P.C. Boards or Unit to prevent damage. b. When reinstalling, ensure that the connectors are connected and electrical components have not been damaged. c. Do not supply power to the unit during disassembly and reassembly. REMOVAL OF THE BALLAST C.B.A. AND THE TV/TUNER UNIT FROM THE CABINET 1. Remove the Rear Cover by removing the 18 Screws (401). Rear Cover 401 Fig. D1-1 2. Remove the Rear Support Plat