panasonic DSD0303706P1 free download

File name DSD0303706P1.pdf

Order No. DSD0303706P1 B12 Model No.: DVD-S35P/S35UP (Order No. CHM0302001C1) Effective From: Running change Subject: Correction of "Service Precautions", "Adjustment Procedures" and "Replacement Parts List" Please revise the original parts list in the Service Manual to confirm to the change(s) shown herein. If new part numbers are shown, be sure to use them when ordering parts. Reason for Change *The circled item indicates the reason. If no marking, see the Notes in the bottom column. 1.Improve performance 2.Change of material or dimension 3.To meet approved specification 4.Standardization 5.Addition 6.Deletion 7.Correction 8.Other Interchangeability Code Parts Set Production Original Early Original or new parts may be used in early or late production set. A New Late Use original parts until exhausted, then stock new parts. Original parts may be used in early production set only. New parts Original Early B may be used in early or late production set. Use original parts New Late where possible, then stock new parts. Original Early New parts only may be used in early or late production set. C New Late Stock new parts. Original parts may be used in early production set only. New parts Original Early D may be used in late production set only. Stock both original and New Late new parts. E Other This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death. 2003 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is violation of law. 1,Correction of "Service Precautions" 2, Correction of "Adjustment Procedures" 3,Correction of "Replacement Parts List" *The marking (RTL) indicates the retention time is limited for this ite