panasonic 7jcs free download

File name 7jcs.pdf

C C C When importing WMA/MP3 data ( OI page 44), creating a backup ( OI page 82), or restoring backed up data ( OI page 83), you can connect this unit directly to your PC with a cross LAN cable. When using this connection method, changes to the settings on this unit and your PC are necessary. Preparation 1 Connect this unit to the PC with a cross LAN cable (not included). Settings on the PC 2 To display the picture turn on the television and select the appropriate video input to suit the connections to this unit. For further information, refer to the operating instructions for 3 Press [ ]. your PC. These instructions are the examples of operating a PC with Windows XP operating system. Cross LAN cable PC (not included) 1 "Control Panel" > "Network Connections" > "Local Area Connections", then click on "Properties". 2 Click on "Properties" in "Internet Protocol (TCP/IP)". To LAN terminal To LAN terminal (10/100) 3 Select "Use the following IP address" and set the IP address and subnet mask. (100BASE-T or greater) Note Settings on this unit Connecting this unit to a PC in the manner described above may result in temporary loss of Internet connection. When 1 Press [SETUP]. using the Internet, change all the settings listed above back to the previous settings. You can also use the connection 2 Press [ ] to select "Other Setup" and press C method described in "Network connection" ( page 94). [ENTER]. 3 Press [ ] to select "Network" and press [ ]. Tips 4 Press [ ] to select "Network Settings" and press To make sure that you can reconnect to a network, we [ENTER]. recommend taking note of the network setting values used (IP addresses, Gateway, etc.) before changing any network 5 Press [ ] to select "TCP/