Pentax pentax-me-s_sm free download

File name pentax-me-s_sm.pdf

PRODUCT No. 23903 SERVICE MANUAL ENGLISH Disassembling and assembling procedures are almost the same as 23900 and/or 23901. Therefore, the details of disassembling and assembling procedures are abbreviated. Here is explained about special items for 23903. Disassembly 1. Bottom cover assy. (A400) CSS 1.7 x 3 x 2 CSS 1.7 x 2 Connector seat (A23) 2. Winding lever assy. (0-C69) Cover screw (C139-01) Winding lever nut (C8) Winding lever assy, (0-C69) Winding lever friction spring left handed left handed (C7-01) 23600K-C135-A 23600K-C134-A-2 3. Rewinding knob assy. (0-D6), ASA ring assy. (D-D11-01) Rewinding knob assy. (0-D6) Nut (D15) *Washer (D21) ASA ring assy. (0-D11-01) *Washer (D2l) To adjust the torque of click of ASA ring. 4. Top cover assy. (A300) Top cover retainer screw A (A333) x 2 B (A334) C (A342) x 2 D (A345) *Top cover assy. (A300) *Top cover assy. (A300) Material of Top cover assy. (A300) is a plastic. But the surface is made conductive by surface treatment. So that the electrical conductive does not apply on the back of Top cover assy. (A300). 5. Unsoldering 1) P.C. board pattern (T100) 2) Relay P.C. board assy. (0-A129) Before unsoldering, take out Insulation seal (A152) to prevent melting by soldering iron. 23903 Page 1 of 32 3) f-volume (K101) 4) Hot shoe contact A (N4), Hot shoe contact C (N9) 5) EF switch contact piece (A44) Before unsoldering, take out ASA volume (R100) ASA volume retainer screw (A16-01) CNL-D 1.7 x 2. 5 ASA volume (R100) 6) Connector base plate assy. (0-A21) 6. Self-timer charge lever assy. (0-A118) Self-timer screw (A122) Self-timer charge lever assy. (0-A118) Self-timer collar (A123) W30 231K-H50 7. Body covering Body covering, right (A19) Body covering, left (A20) After peel off, re-install Self-timer charge lever assy. (0-A118) 8. Front board and Mirror housing complete assy. At the charged condition. CNL-D 1.7 x 3 x 2 P.C. board pattern retainer (I1) W14 Front board retainer screw (A132-01) x 4 9. P.C. board pattern (T100) T-CNL-E 1.7 x 4 Hot shoe contact piece A (N4) Insulation collar (N8) Insulation plate (N13) T-CNL-E l.7 x 3 Hot shoe contact piece C (N9) CNL-D 1.4 x 3 LED retainer collar (T212) 23903 Page 2 of 32 *PC board pattern (T100) LED part in P. C. board pattern (T100) should be taken out straight and carefully to prevent making scratches on Shutter speed scale indication plate (M10). *P.C. board pattern (T100) It is recommended that P.C. board pattern (T100) is taken out from Mirror housing under the condition separated from Body proper (A1). due to difficulty of LED part taken out and/or installed. Assembly and Adjustment 1. Cocked indicator assy. (0-C23) Check the spring tenSion. At the released condition, the spring should have no tension. If the spring tension is stronger at the charged condition, 2nd curtain speed will be affected. Accordingly, 1/2000sec will be changed by its spring tension. (l/2000sec should be not changed by its spring tension.) 2. Adjustment of Main