GW-INSTEK readme free download

File name readme.txt

"FreeView V1.04" Installation Procedure(for XP) 1. This program can be performed under WIN2000 and XP now. You must have at least 10MB of available hard-disk space. This program has been tested on the PC with: a. CPU: Celeron 1.8GHz, DDR DRAM:256MB, Hard disk 40GB (Recommended) b. CPU: 800MHz PIII, DRAM: 128MB, Hard disk: 20GB (Good) c. CPU: AMD K6 400MHz PIII, DRAM: 128MB, Hard disk: 20GB (Acceptable) 2. Before install this program. Please power off your oscilloscope. And connect USB cable between PC and oscilloscope. If you had installed previous FreeView version. Please uninstall USB driver first by performing Ftdiunin.exe under C:\Program Files\FreeView\FreeView\Driver. And uninstall previous FreeView version before upgrading to V1.04. 3. Please unzip FV104.zip to C:\ or a temporary folder. a. We could find a folder "FV104" under C:\ or the temporary folder which the files been unzipped. b. Double click "FV104", we could find installation program "Setup.exe". c. Double click Setup.exe to start FreeView installation. 4. Please power on your oscilloscope, and change the interface to USB a. Press Utility -> Interface Menu(F2), and then press F1 to select USB interface. b. When you select USB interface, PC will find a new hardware device "XXX-XXXC"(for example) immediately. c. Install software for "Your oscilloscope USB Converter": Select Automatic installation(I) and click "Nest Step"(N). d. Click "Continue"(C). e. Click "Complete". f. Install software for "Your oscilloscope USB Port Driver": Select Automatic installation(I) and click "Nest Step"(N). g. Click "Continue"(C). h. Click "Complete". 5. Execute FreeView. 6. Click "File" and select "Connect", you could see the waveform updated continuously. 7. If you Select "Save/Print" under "File", you can save it to a file with bmp, jpg... format. The printing function is ready in early version of V1.01. ---------------------------------------------------------------------------------------------------- "FreeView V1.04" Installation Procedure(for WIN2000) 1. This program can be performed under WIN2000 and XP now. You must have at least 10MB of available hard-disk space. This program has been tested on the PC with: a. CPU: Celeron 1.8GHz, DDR DRAM:256MB, Hard disk 40GB (Recommended) b. CPU: 800MHz PIII, DRAM: 128MB, Hard disk: 20GB (Good) c. CPU: AMD K6 400MHz PIII, DRAM: 128MB, Hard disk: 20GB (Acceptable) 2. Before install this program. Please power off your oscilloscope. And connect USB cable between PC and oscilloscope. If you had installed previous FreeView version. Please uninstall USB driver first by executing Ftdiunin.exe under C:\Program Files\FreeView\FreeView\Driver. And uninstall previous FreeView version before upgrading to V1.04. 3. Please unzip FV104.zip to C:\ or a temporary folder. a. We could find a folder "FV104" under C