onkyo dpc-7.4 free download

File name onkyo DPC-7.4.pdf

DPC-7.4 Ref. No. 3765 SERVICE MANUAL Aug, 2003 DVD CHANGER MODEL DPC-7.4 Black model BMDD BMPA 120V AC, 60Hz 230-240V AC, 50Hz RC-543DV SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. www.denom.com DPC-7.4 SPECIFICATION Video system Region code Laser Frequency response DVD linear audio CD audio Signal-to-noise ratio (digital audio) Audio dynamic range (digital audio) Harmonic distortion (digital audio) Wow and flutter Operating conditions Temperature Installation COMPONENT VIDEO Video outputs S VIDEO (S-Video) VIDEO (composite video) OPTICAL Audio outputs COAXIAL ANALOG Power supply Power consumption General Power consumption in Standby mode Weight Dimensions (W x H x D) Specifications and features subject to change without notice. Standard NTSC (U.S. model), PAL/AUTO (Australian model) 1 (U.S. model), 4 (Australian model) Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD) 4 Hz - 22 kHz @ 48 kHz sampling rate 4 Hz - 44 kHz @ 96 kHz sampling rate 4 Hz - 20 kHz 100 dB 93 dB 0.006% Below measurable level (±0.001% (W. PEAK) or less 5 to 35 C (41 F to 95 F) Install horizontally Y: 1.0 V (p-p), 75 ohm, negative sync, RCA/phono x1, BNC x1 PB/PR: 0.7 V (p-p), 75 ohm Y: 1.0 V (p-p), 75 ohm, negative sync, 4-pin mini DIN x2 C: 0.286 V (p-p), 75 ohm 1.0 V (p-p), 75 ohm, negative sync, RCA/phono x2 -22.5 dBm, optical connector x1 0.5 V (p-p), 75 ohm, RCA/phono x1 2.0 V rms, 440 ohm, RCA/phono x2 120 V AC, 60 Hz (U.S. model) 230-240 V AC, 50 Hz (Australian model) 13 W 1.6 W (U.S. model) 2.0 W (Australian model) 6.4 kg (14.1 lbs.) 435 x 131 x 436 mm (17-1/8" x 5-3/16" x 17-3/16") www.denom.com DPC-7.4 SERVICE PROCEDURES-1 PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs a laser. Therefore, be sure to follow carefully the instructions below when servicing. WARNING!! SERVICE WARNING : DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICKUP BLOCK. Laser Diode Properties Wavelength: 650/780nm (DVD/CD) WARNING WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of