File information: | |
File name: | Panel_LiteMax_DLH1954_0_[DS].pdf [preview Panel LiteMax DLH1954 0 [DS]] |
Size: | 607 kB |
Extension: | |
Mfg: | . Various |
Model: | Panel LiteMax DLH1954 0 [DS] 🔎 |
Original: | Panel LiteMax DLH1954 0 [DS] 🔎 |
Descr: | . Various LCD Panels Panel_LiteMax_DLH1954_0_[DS].pdf |
Group: | Electronics > Consumer electronics > LCD Panels |
Uploaded: | 24-07-2020 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Panel_LiteMax_DLH1954_0_[DS].pdf LITEMAX DLF/DLH1954 Sunlight Readable 19" LED B/L LCD (1st Edition 6/6/2008 ) All information is subject to change without notice. Approved by Checked by Prepared by David Sharline Eric LITEMAX Electronics Inc. 8F, No.137, Lane 235, Bau-chiau Rd., Shin-dian City, Taipei County, Taiwan R.O.C. Tel : 886-2-8919-1858 Fax: 886-2-8919-1300 Homepage: http://www.litemax.com.tw Page 1 Record Revision Version and Date Page Old Description New Description Remark Page 2 Contents Record Revision 2 Contents 3 Handling Precautions 4 General Description 5 Display Characteristics 5 Optical Characteristics 6 Optical Test 6 Test Mode 7 Functional Block Diagram 9 Absolute Maximum Ratings 10 Absolute Ratings of TFT LCD Module 10 Absolute Ratings of Backlight Unit 10 Absolute Ratings of Environment 10 Electrical Characteristics 11 TFT LCD Module 11 Pixel Format Image 12 The Input Data Format 13 Signal Description 14 Interface Timing 15 Power ON/OFF Sequence 17 Connector & Pin Assignment 18 TFT LCD Module 18 Page 3 Handling Precautions 1) Since front polarizer is easily damaged, be extremely careful when handling panel. 2) Be sure to turn off power supply when inserting or disconnecting from input connectors. 3) Wipe off water immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on a hard surface. 6) Since CMOS LSI is used in this module, be careful of static electricity by grounding those handling the display. 7) Do not open nor modify the module assembly. 8) Do not press or touch the panel surface with hands or tools. 9) Do not press or move the reflector sheet at the back of the module in any direction. 10) **At the insertion or removal of the signal Interface Connector, be sure not to rotate nor tilt the interface connector of the TFT module. 11) After installation of the TFT module into an enclosure (Desktop monitor Bezel, for e |
Date | User | Rating | Comment |