whirlpool 6ADP5966WHM free download

File name 6ADP5966WHM.pdf

SERVICE Whirlpool Europe Customer Services 6ADP 5966 WHM Service Manual Dishwasher 6ADP 5966 WHM Model Version 6ADP 5966 WHM 8542 966 53710 Technical data Spare part list Exploded view Circuit diagram Program diagram Text/Legend Family Page 2-3 4-5 6-7 8 9 10 - 16 VBL - HIGH 6 Sensor 2 This documentation is only intended for qualified technicians who are aware of the respective safety regulations. Date: 08.08.2002 Subject to modification Document-No.: 4812 718 18235 08.08.2002 / Page 2 Doc. No: 4812 718 18235 6ADP 5966 WHM 8542 966 53710 Whirlpool Europe Customer Service SERVICE Technical data Dimension Height Width Depth Weight Electronic boards Service boards see spare part list Serial boards see on the boards itself DUB 4619 724 04851 Programing of version and programmed control board, see ,,Service" and ,,Data set" on rating plate of inner door: CB programmed 464683 Data set 464673 Basic control board, not programmed see on the board itself 4619 724 42092 Succession of programs Programs Succession Alarms Refill rinse aid Options Zone washing Delay function Program information Start indicator Pre wash Main wash Drying End All programs will be locked after start. Changing the program or finishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer) A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position. Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program. see program diagram A1a - A2a - A3a - A5a - A8a - A9a 85.0 59.7 61.0 58 cm cm cm kg Water Volume at alternating spray system Volume at alternating spray system (same level when selected zone washing as in the normal programs) Water Regeneration Back rinse 3x Prewash Main wash Intermediate rinse 1 Intermediate rinse 2 Clear rinse Safety/ overflow Measuring the level Remove the coarse sieve, put in a measuring meter into the sump, measure the hight of the water level. Detergent max. Pre-wash Main-wash Rinse aid 6 Dosage steps Water pressure Inlet pressure Spray pump pressure Rotations Spray pump motor Drain pump motor Spray arm lower Spray arm upper Fan for drying 2800 3000 30 - 40 30 - 40 2500 RPM RPM RPM RPM RPM 0.3 - 10 0.3 bar bar 10 40 135 1-6 cm3 cm3 cm3 ml Volume 0.3 l 1.0 l 3.9 l 3.2 l 3.2 l 3.2 l 3.2 l 8.5 l Level 15 mm 60 mm 120 mm 118 mm 118 mm 118 mm 118 mm 141 mm Spray arms, turning rhythm at alternating spray system Turning starts every time with the upper spray arm Pre wash Lower arm ~3min, Upper arm ~1min Main wash Lower arm ~3min, Upper arm ~5min Intermediate rinse Lower arm ~2min, Upper arm ~2min Final rinse Lower arm ~2min, Upper arm ~2min Service Test program Lower arm ~30sec, Upper arm ~30sec Remark: When switching of the main switch or interrupt the mains during the Test Program runs, then the alternating of the spray arm