Samsung Разборка и сборка free download

File name Разборка и сборка.pdf

Disassembly & Reassembly 12. Disassembly & Reassembly 12-1 Overhaul Disassembly & Reassembly Notice - Be sure to separate the power cord before disassembling the unit. - Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Main Board, Y Main Board, etc. (A spark may be generated by the electric charge, and there is danger of electronic shock.) - Check that the cables are properly connected referring to the circuit diagram when disassembling or assembling the unit taking care not to damage the cables. - Take care not to cause a flaw in the Glass Filter in the front. - Assemble the boards in the reverse order of the disassembly. - The plasma must be layed down on a flat padded surface for disassembly and reassembly. 12-1-1 Separation of ASSY STAND P-BASE Part Name Description Description Photo Stand Remove 4 screws. : PH,+,WSP,S,M4,L35,ZPC(BLK) Pull the stand down to remove it from the unit. : Please lay the PDP unit face down on a soft surface when removing the stand. 12-1-2 Separation of ASSY BRACKET P-TERMINAL Part Name Description Description Photo Bracket Remove the 8 screws on the Bracket Terminal. Terminal : BH,+,-,S,M4,L8,ZPC(BLK) Remove the 2 Hex nuts for the PC input. : M3,L6,NI PLT,SUM24L,#4-40 Remove Bracket Terminal. Samsung Electronics 12-1 Disassembly & Reassembly 12-1-3 Separation of ASSY COVER P-REAR Part Name Description Description Photo Cover Remove 22 screws. Rear : BH,+,-,S,M4,L8,ZPC(BLK) Remove 4 screws. : M8,L16,ZPC(BLK) Remove the Cover Rear. 12-1-4 Separation of ASSY PCB MISC-MAIN Part Name Description Description Photo Main Remove 4 screws Board : PH,+,WWP,M3,L8,NI PLT Remove all connectors from the board. Remove the Main Board. 12-1-5 Separation of Power Inlet socket Part Name Description Description Photo Power Remove 3 screws. Inlet : BH,+,S,M4,L8,ZPC(YEL) socket : FH,+,M3,L10,NI PLT,SWRCH18A,FP,- Remove the Power Inlet socket. 12-2 Samsung Electronics Disassembly & Reassembly 12-1-6 Separation of BRACKET-PCB Part Name Description Description Photo Bracket Remove 4 screws. PCB : BH,+,-,S,M4,L8,ZPC(BLK) Remove 2 screws