File information: | |
File name: | la4145.pdf [preview LA4145] |
Size: | 119 kB |
Extension: | |
Mfg: | Sanyo |
Model: | LA4145 🔎 |
Original: | LA4145 🔎 |
Descr: | 0.6 to 0.9W power amplifier for radio cassette recorders |
Group: | Electronics > Components > Integrated circuits |
Uploaded: | 09-03-2004 |
User: | plamensl |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name la4145.pdf Ordering number: EN1339D Monolithic Linear IC LA4145 0.6 to 0.9 W AF Power Amplifier for Radio Cassette Recorders Features Package Dimensions unit : mm . The LA4145 is especially suited for use in cassette tape . . . . . recorder, radio-cassette, recorder, stereo cassette player applications. 0.6 W typ/VCC = 6.0 V, RL = 8 , THD = 10% 0.9 W typ/VCC = 6.0 V, RL = 4 , THD = 10% Minimum number of external parts required Soft clip Small pop noise at VCC ON/OFF mode Voltage gain fixed at 50 dB. An external resistor can be connected to reduce this value. 3017C-SIP9 [LA4145] SANYO : SIP9 Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Maximum output current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max IO peak Pd max Topr Tstg 50 × 50 mm2 with PCB Quiescent mode Operating mode RL = 8 Conditions Ratings 9 8 500 0.9 20 to +70 40 to +150 Unit V V mA W °C °C Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Recommended load resistance Operating voltage range Symbol VCC RL VCC Conditions Ratings 6 4 to 8 3.6 to 8 Unit V V Operating Characteristics at Ta = 25°C, VCC = 6.0 V, RL = 8 , Rg = 600 , f = 1 kHz Parameter Quiescent current Voltage gain Output power Total harmonic distortion Input resistance Output noise voltage Ripple rejection ratio Symbol ICCO VG PO THD ri VNO SVRR Conditions LA4145 48 THD = 10%, RL = 4 THD = 10%, RL = 8 PO = 0.1 W Rg = 10 k, B.P.F. = 20 Hz to 20 kHz Rg = 0, fR = 100 Hz, VR = 150 mV 0.45 min typ 10 50 0.9 0.6 0.2 30 0.6 40 max 20 52 Unit mA dB W W % k mV dB 1.0 1.2 35 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 53096HA(II)/O217KI/N055MW/4034/N163KI,TS No.1339-1/5 LA4145 Proper care in changing voltage gain An external resistor can be connected in series with the feedback capacitor at pin 2 to reduce the voltage gain. (See RNF-VG characteristic.) IC usage notes 1. Maximum ratings If the IC is used in the vicinity of the maximum ratings, even a slight variation in conditions may cause the maximum ratings to be exceeded, thereby leading to breakdown. Allow an ample margin of variation for supply voltage, etc. and use the IC in the range where the maximum ratings are not exceeded. Pin-to-pin short If power is applied when the space between pins is shorted, breakdown or deterioration may occur. When mounting the IC on the board or applying power, make sure that the space between pins is not shorted with solder, etc. Radio applications For use in radio applications, keep a good distance between IC and bar antenna. Printed circuit pattern When designing the printed circuit pattern, make the power supply, output, and ground lines thicker and shorter and determine the pattern and parts placement so that no feedback loop is formed between input and output. Place power capacitor C6, oscillation blocking capacitor C3 as close to the IC pin as po |
Date | User | Rating | Comment |