File name SA-AK177.pdfORDER NO. MD0105111C3
CD Stereo System
SA-AK177
Colour (S)... Silver Type Area (GC)...Asia, Latin America, Africa and Middle Near East TAPE SECTION : AR2 MECHANISM SERIES CD SECTION : RAE0152Z-3 TRAVERSE DECK SERIES
1
2005-05-13
SPECIFICATIONS
Specifications
AMPLIFIER SECTION PMPO RMS power output THD 10%, both channels driven Front 80 Hz (Low channel) Front 1 kHz (High channel) Center 1 kHz Surround 1 kHz Total power output in Dolby Pro Logic mode RMS power output THD 10%, both channels driven 80 Hz (Low channel) 1 kHz (High channel) Total power output in stereo mode Input sensitivity AUX MIC Input Impedance AUX MIC FM TUNER SECTION Frequency range Sensitivity S/N 26 dB Antenna terminal(s) AM TUNER SECTION Frequency range 75 3000 W
75 W per channel (8 40 W per channel (8
) )
100 W (8 ) 35 W per channel (8 ) 400 W
) 75 W per channel (8 40 W per channel (8 ) 115 W
250 mV 0.7 mV 13 k 680 87.50 - 108.00 MHz (50 kHz steps) 2.5 V (IHF) V 2.2 (unbalanced)
522 - 1629 kHz (9 kHz steps) 520 - 1630 kHz (10 kHz steps)
Sensitivity S/N 20 dB (at 999 kHz) CASSETTE DECK SECTION
560
V/m
2
2005-05-13
Track system Heads Record/playback Erasure Motor Recording system Erasing system Tape speed
4 track, 2 channel Solid permalloy head Double gap ferrite head DC servo motor AC bias 100 kHz AC erase 100 kHz
4.8 cm/s Frequency response (+3 dB, -6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz - 14 kHz HIGH (TYPE II) S/N 35 Hz - 14 kHz 50 dB (A weighted) 0.18% (WRMS) Approx. 120 seconds with C-60 cassette tape
Wow and flutter Fast forward and rewind time CD SECTION Sampling frequency Decoding
44.1 kHz
16 bit linear Beam source/wave length Semiconductor laser/780 nm Number of channels Stereo Frequency response Wow and flutter Digital filter D/A converter Video CD Video data Audio data Video output Video format Output voltage Physical format GENERAL Power supply Power consumption Power consumption in standby mode 0.9 W Dimensions (W x H x D) Mass SYSTEM SC-AK177 (GC) 250 x 332 x 319 mm 9.0 kg Music Center: SA-AK177 (GC) Speaker: SB-AK77 (GC)
3 2005-05-13
20 Hz - 20 kHz (+1, -2 dB) Below measurable limit 8 fs MASH (1 bit DAC) Based on MPEG 1 Based on MPEG 1 Layer 2 NTSC/PAL 1 Vp-p, 75 k Based on CD-ROM format AC 110 V/127 V/220-230 V /240V, 50/60 Hz 150 W
Speaker: SB-AK77 (GC) Center speaker: SBPC70A (GC) Surround speaker: SBPS70A (GC) Notes:
1. Specifications are subject to change without notice. Weight and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. HIGH stands for High Frequency. LOW stands for Low Frequency.
1
1. Before Use
Be sure to disconnect the mains cord before adjusting the voltage selector. Use a minus(-) screwdriver to set the voltage selector (on the rear panel) to the voltage setting for the area in which the unit will be used. (If the power supply in your area is 117V or 120V, set to the "127V" position.) Note that this unit will be seriously damaged if this setting is not made cor |