File name 4503.pdfData sheet acquired from Harris Semiconductor SCHS068C - Revised October 2003
CD4503B is a hex noninverting buffer with 3-state outputs having high sink- and source-current capability. Two disable controls are provided, one of which controls four buffers and the other controls the remaining two buffers. The CD4503B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).
Copyright 2003, Texas Instruments Incorporated
MECHANICAL
MPDI002C JANUARY 1995 REVISED DECEMBER 20002
N (R-PDIP-T**)
16 PINS SHOWN
PLASTIC DUAL-IN-LINE PACKAGE
PINS ** DIM A 16 9 A MAX
14 0.775 (19,69) 0.745 (18,92)
16 0.775 (19,69) 0.745 (18,92)
18 0.920 (23,37) 0.850 (21,59)
20 1.060 (26,92) 0.940 (23,88)
A MIN
0.260 (6,60) 0.240 (6,10)
C
MS-100 VARIATION
AA
BB
AC
AD
1 0.070 (1,78) 0.045 (1,14) D
8
0.045 (1,14) 0.030 (0,76) D
0.020 (0,51) MIN
0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gauge Plane
0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.010 (0,25) M
0.430 (10,92) MAX
14/18 PIN ONLY 20 pin vendor option
D 4040049/E 12/2002
NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001, except 18 and 20 pin minimum body lrngth (Dim A). D. The 20 pin end lead shoulder width is a vendor option, either half or full width.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
MECHANICAL DATA
MSOI002B JANUARY 1995 REVISED SEPTEMBER 2001
D (R-PDSO-G**)
8 PINS SHOWN 0.050 (1,27) 8 5 0.020 (0,51) 0.014 (0,35) 0.010 (0,25)
PLASTIC SMALL-OUTLINE PACKAGE
0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81)
0.008 (0,20) NOM
Gage Plane 1 A 4 0° 8° 0.044 (1,12) 0.016 (0,40)
0.010 (0,25)
Seating Plane 0.069 (1,75) MAX 0.010 (0,25) 0.004 (0,10) 0.004 (0,10)
PINS ** DIM A MAX A MIN
8 0.197 (5,00) 0.189 (4,80)
14 0.344 (8,75) 0.337 (8,55)
16 0.394 (10,00) 0.386 (9,80)
4040047/E 09/01 NOTES: A. B. C. D. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). Falls within JEDEC MS-012
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C JANUARY 1995 REVISED FEBRUARY 1999
PW (R-PDSO-G**)
14 PINS SHOWN
PLASTIC SMALL-OUTLINE PACKAGE
0,65 14 8
0,30 0,19
0,10 M
0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 A 7 0° 8° 0,75 0,50
Seating Plane 1,20 MAX 0,15 0,05 0,10
PINS ** DIM A MAX
8
14
16
20
24
28
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protru