File name 4513.pdfMC14513B BCD-To-Seven Segment Latch/Decoder/Driver
CMOS MSI (LowPower Complementary MOS)
The MC14513B BCDtoseven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the functions of a 4bit storage latch, an 8421 BCDtoseven segment decoder, and has output drive capability. Lamp test (LT), blanking (BI), and latch enable (LE) inputs are used to test the display, to turnoff or pulse modulate the brightness of the display, and to store a BCD code, respectively. The Ripple Blanking Input (RBI) and Ripple Blanking Output (RBO) can be used to suppress either leading or trailing zeroes. It can be used with sevensegment light emitting diodes (LED), incandescent, fluorescent, gas discharge, or liquid crystal readouts either directly or indirectly. Applications include instrument (e.g., counter, DVM, etc.) display driver, computer/calculator display driver, cockpit display driver, and various clock, watch, and timer uses.
http://onsemi.com
18 PDIP18 P SUFFIX CASE 707 1 A WL, L YY, Y WW, W
MARKING DIAGRAMS
MC14513BCP AWLYYWW
· · · · · · · · · · ·
Low Logic Circuit Power Dissipation Highcurrent Sourcing Outputs (Up to 25 mA) Latch Storage of Binary Input Blanking Input Lamp Test Provision Readout Blanking on all Illegal Input Combinations Lamp Intensity Modulation Capability Time Share (Multiplexing) Capability Adds Ripple Blanking In, Ripple Blanking Out to MC14511B Supply Voltage Range = 3.0 V to 18 V Capable of Driving Two LowPower TTL Loads, One Lowpower Schottky TTL Load to Two HTL Loads Over the Rated Temperature Range.
Symbol VDD Vin I PD TA Tstg IOHmax POHmax Parameter DC Supply Voltage Range Input Voltage Range, All Inputs DC Current Drain per Input Pin Power Dissipation, per Package (2.) Operating Temperature Range Storage Temperature Range Maximum Continuous Output Drive Current (Source) per Output Maximum Continuous Output Power (Source) per Output (3.) Value 0.5 to +18.0 0.5 to VDD + 0.5 10 500 55 to +125 65 to +150 25 50 Unit V V mA mW °C °C mA mW
= Assembly Location = Wafer Lot = Year = Work Week
ORDERING INFORMATION
Device MC14513BCP Package PDIP18 Shipping 20/Rail
MAXIMUM RATINGS (Voltages Referenced to VSS) (1.)
This device contains protection circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit. A destructive high current mode may occur if Vin and Vout are not constrained to the range VSS v (Vin or Vout) v VDD. Due to the sourcing capability of this circuit, damage can occur to the device if VDD is applied, and the outputs are shorted to VSS and are at a logical 1 (See Maximum Ratings). Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD).
1. |