Kyocera FS-600 free download

File name Kyocera FS-600-680 Service Manual.pdf

L A S E R P R I N T E R Ecosys FS-600/680 The model FS-600 printer was designed by the world-famous F.A. Porsche consultancy. The FS-600 has 4-ppm and the FS-680 has 8-ppm printing speed. FS-600/680 Service Manual ©Kyocera Corporation 1997--1999. All rights reserved. Export Edition Notice The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition. No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No responsibility is assumed for defects in the printer's firmware. The contents of this manual are protected by copyright. No part of this manual may be reproduced or copied by any means without the permission of the copyright holder. The printer's firmware (contents of its read-only memory) is similarly protected by copyright. This Kyocera printer uses PeerlessPrint5 to provide the HP LaserJet IV compatible PCL5e language emulation. PeerlessPrint5 is a trademark of the Peerless Group, Redondo Beach, CA 90278, U.S.A. This product was developed using the TornadoTM Real Time Operating System from Wind River Systems. Trademark Notice Prescribe is a registered trademark of Kyocera Corporation. PRESCRIBE IIe, KIR, Kyocera Image Refinement, Ecosys, and Ecotone are trademarks of Kyocera Corporation. Diablo 630 is a product of Xerox Corporation. IBM Proprinter X-24E is a product of International Business Machine Corporation. Epson LQ-850 is a product of Seiko Epson Corporation. HP LaserJet 5Si and HP-7475A are product of HewlettPackard Company. Hewlett-Packard, PCL, and HP-GL are registered trademarks of Hewlett-Packard Company. Centronics is a trade name of Centronics Data Computer Corp. Warning This equipment has been certified to comply with the limits for a Class B computing device, pursuant to Subpart J of Part 15 of FCC Rules. Only peripherals (computer input/output devices, terminals, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Check that the cable is wired correctly. If an IBM communication adapter cable type 1502067 is used, it will have to be resoldered the wiring at the printer end of the cable. The procedure is as follows. Conventions/Preface Conventions Throughout this manual, the following conventions are used: Color is available when viewed online to emphasize important notices. CAPITAL letters are used to name printer parts and assemblies. Italic letters refer related chapters or sections or documentations. Bold letters are also used for emphasis wherever italics may cause a confuse. This symbol followed by Warning denotes that the following paragraph(s) includes precautions which, if ignored, could result in personal injury, and/or irrevocable damage to the printer. When