File name EB770F.pdfSPECIFICATIONS
1. PICTURE TUBE Size DefIection Angle Neck Diameter Dot Pitch Face Treatment Low Radiation 3-2. Power Consumption : 17 inch (FCDT) : 90° : 29.1 mm : 0.25 mm : W-ARASC (Anti-Reflection and Anti-Static Coating),Anti-Glare : TCO99, MPR-II
MODE NORMAL (ON) STAND-BY SUSPEND OFF H/V SYNC ON/ON OFF/ON ON/OFF OFF/OFF POWER CONSUMPTION LED COLOR GREEN
less than 105 W less than 15 W
ORANGE
less than 15 W less than 5 W
ORANGE
2. SIGNAL 2-1. Horizontal & Vertical Sync 1) Input Voltage Level : Low=0~1.2V, High=2.5~5.5V 2) Sync Polarity : Positive or Negative 2-2. Video Input Signal 1) Voltage Level a) Color 0, 0 b) Color 7, 0 c) Color 15, 0 2) Input Impedance 3) Video Color 4) Signal Format
: 0 ~ 0.7 Vp-p : 0 Vp-p : 0.467 Vp-p : 0.7 Vp-p : 75 : R, G, B Analog : Refer to the Timing Chart
4. DISPLAY AREA 4-1. Active Video Area : · Max Image Size - 325.1 x 243.8 mm (12.80" x 9.60") · Preset Image Size - 310 x 230 mm (12.20" x 9.06") 4-2. Display Color : Full Colors 4-3. Display Resolution : 1024 x 768 / 85Hz (Non-Interlace) 4-4. Video Bandwidth : 110 MHz 5. ENVIRONMENT 5-1. Operating Temperature: 15°C ~ 30°C (59°F ~ 86°F) (Ambient) 5-2. Relative Humidity : 8%~ 80% (Non-condensing) 5-3. Altitude : 5,000 m 6. DIMENSIONS (with TILT/SWIVEL) Width : 400.0 mm (15.74 inch) Depth : 424.0 mm (16.70 inch) Height : 395.0 mm (15.55 inch) 7. WEIGHT (with TILT/SWIVEL) Net Weight : 16.0 kg (35.28 lbs.) Gross Weight : 18.9 kg (41.67 lbs.)
2-3. Signal Connector 15-pin Connector (Attached) 2-4. Scanning Frequency Horizontal Vertical
: 30 ~ 70 kHz : 50 ~ 160 Hz
3. POWER SUPPLY 3-1. Power Range AC 100~240V (Free Voltage), 50/60Hz, 2.0A Max.
-2-
TIMING CHART
VIDEO
B A
C
E D F
SYNC
<< Dot Clock (MHz), Horizontal Frequency (kHz), Vertical Frequency (Hz), Horizontal etc... (µs), Vertical etc... (ms) >> Mode
H/V Sort Sync Polarity Frequency Total Period (E) Video Active Time (A) Blanking Time Sync Duration (D) (B) Back Porch (F) Front Porch (C)
Resolution 640x480 75Hz 800x600 75Hz 800x600 85Hz 1024x768 85Hz
1 2 3 4
H V H V H V H V
+ + + + + +
37.50 74.99 46.88 75.01 53.68 85.07 68.677 85.00
26.67 13.335 21.33 13.331 18.63 11.755 14.561 11.764
20.32 12.802 16.16 12.798 14.22 11.178 10.836 11.182
6.35 0.533 5.17 0.533 4.41 0.577 3.725 0.582
2.03 0.080 1.62 0.064 1.14 0.056 1.016 0.044
3.81 0.427 3.23 0.448 2.70 0.503 2.201 0.524
0.51 0.026 0.32 0.021 0.57 0.018 0.508 0.014
* Mode 1~Mode 4: Basic Mode
CONTROL LOCATIONS
1
2
3 6 5 4
7
CONTROL MAIN
NO. 1 2 3 4
Ref. No. SW207 SW204 SW205 SW203
Control Function POWER BUTTON OSD SELECT OSD ADJUSTMENT(UP) OSD ADJUSTMENT(DOWN)
NO. 5 6 7 8
FBT
8
Ref. No. SW206 SW202 SW201 VR901
Control Function OSD ADJUSTMENT(LEFT) OSD ADJUSTMENT(RIGHT) MENU BUTTON B+ ADJUSTMENT
-6-
ADJUSTMENT
GENERAL INFORMATION
All adjustment are thoroughly checked and corrected when the monitor leaves the factory, but sometimes several adjustments may be required. Adjustment should be following procedure and after wa |