Hitachi dvp-250e_u free download

File name HITACHI DVP-250E_U.pdf

TK NO. 9901E SERVICE MANUAL DV-P250U/(PX) DV-P250E/(UK) DV-P250A/(M)/(S)/(AU) DV-P250C ADVICE Please carefully read this guide before using the device. The Hitachi DVD Player has been designed to prevent fire, electrical shock, injury, or harmful radiation. It has been legally fabricated in accordance with the Electrical Appliances Act. Therefore, when using the device, please follow advice in this service guide to keep it safe to use. 1. In brief DV-P250 is a device for DVD playback. This device is to be used by connecting it to the video input terminal of a TV set. 2. Features 6 6 Disc navigation system facilitates program search. Speedy operation by 2x speed drive. SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT. DVD PLAYER July 1999 Digital Media Products Division, Tokai PRECAUTIONS FOR SAFETY(Please follow.) Before undertaking repair work, please read through this [Precautions for safety]. The following points should be observed in order to prevent accidents from happening and to ensure the safety of the device. Degrees of danger or damage that can be caused by faulty operation are indicated by the following marks: WARNING CAUTION Under this mark, there is "Possible death or serious injury". Under this mark, there is "Possible injury or material damage". The following marks identify actions to be taken: This mark indicates items to which `You should pay attention'. This mark indicates items `You have to accomplish'. This mark indicates: `You should be cautious of electric shock'. This mark indicates `Forbidden items'. WARNING You should pay attention. Where a special attention is required, it is indicated by a label or stamp. For example, on the cabinet, chassis, or parts. Please respect the indicated items and the `Precautions for use' of the manual. The original part installation and wiring route shall be restored. For safety, some parts are insulated by a tube or a tape, or installed without contact with substrate. The internal wiring is kept a distance from hot or high voltage parts by clamps or routing. Please restore them as initially done to prevent electric shock or fire from happening. You should be cautious against electric shock. Please be careful during operations because there are high voltage and recharging parts inside. An electric shock or death may happen by touching them. When disassembling, assembling, or replacing a part, the power plug has to be pulled off. Touching by error a powered part may cause an electric shock, death, or injury. Please check safety after servicing. Please check if dismounted screws, parts, and wires are reinstalled as before and if the area surrounding the repair is damaged. Please also measure insulation resistance with a ohmmeter and to confirm that it is more than 20M. There is risk of electric shock or fire if the insulation resistance is less than 20M. Please use designated parts. Parts are characterized by uninflammability and voltage resist