File information: | |
File name: | TXSR600.part1.rar [preview TX-SR600/E] |
Size: | 1650 kB |
Extension: | rar |
Mfg: | Onkyo |
Model: | TX-SR600/E 🔎 |
Original: | TX-SR600 🔎 |
Descr: | Service Manual Receiver TX_SR600/E |
Group: | Electronics > Consumer electronics > Audio |
Uploaded: | 08-09-2005 |
User: | ionel |
Multipart: | 0 1 2 |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name TXSR600.pdf TX-SR600/E Ref. No. 3730 052002 SERVICE MANUAL AV RECEIVER MODEL TX-SR600/E 0 Black, Golden and Silver models BMDD,BMDC BMPP,BMPA,SMPP,GMPA BMWT,GMWT,GMWR,GMWQ GMGK 120V AC, 60Hz 230~240V AC, 50Hz 120/220~230V AC, 50/60Hz 220V AC, 50Hz RC-480M SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. TX-SR600/E SPECIFICATIONS AMPLIFIER SECTION Continuous average power output (FTC) All channels: 80 W per channel min. RMS at 8 ohm, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 105 W min. RMS at 6 ohm, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion. Continuous power output (DIN) 115 W at 6 ohm Maximum power output (EIAJ) 145 W at 6 ohm Dynamic power output (stereo) 2 215 W at 3 ohm 2 160 W at 4 ohm 2 95 W at 8 ohm Total harmonic distortion: 0.08% at rated power 0.08% at 1 W output IM distortion: 0.08% at rated power 0.08% at 1 W output Damping factor: 60 at 8 ohm Input sensitivity and impedance LINE (CD, TAPE, DVD, VIDEO 1-4): 200 mV, 47 kohm MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R): 200 mV, 47 kohm (SUBWOOFER): 36 mV, 47 kohm COAXIAL (DIGITAL): 0.5 Vp-p, 75 ohm DVD, VIDEO 1, 2, 3, 4: 1 Vp-p, 75 ohm 1 Vp-p, 75 ohm (Y) 0.28 Vp-p, 75 ohm (C) COMPONENT VIDEO 1, 2: 1 Vp-p, 75 ohm (Y) 0.7 Vp-p, 75 ohm (PB, PR) Output level and impedance Rec out (TAPE, VIDEO 1): 200 mV, 470 ohm Pre out: 1 V, 470 ohm VIDEO (VIDEO 1, MONITOR OUT): 1 Vp-p, 75 ohm 1 Vp-p, 75 ohm (Y) 0.28 p-p, 75 ohm (C) COMPONENT VIDEO OUT: 1 Vp-p, 75 ohm (Y) 0.7 Vp-p, 75 ohm (PB, PR) Frequency response: 10 Hz to 100 kHz:+1/-3 dB (CD in Direct mode) RIAA deviation: 20 Hz to 20 kHz:±0.8 dB Tone control Bass: ±12 dB at 50 Hz Treble: ±12 dB at 20,000 Hz Signal-to-noise ratio (stereo) CD/Tape: 100 dB (IHF A, 0.5 V input) Muting: - 50 dB TUNER SECTION FM Tuning range: Usable sensitivity Mono: Stereo: 50 dB quieting sensitivity Mono: Stereo: Capture ratio: Image rejection ratio USA & Canadian models: Other area models: IF rejection ratio: Signal-to-noise ratio Mono: Stereo: Alternate channel attenuation: Selectivity: AM suppression ratio: Total harmonic distortion Mono: Stereo: Frequency response: Stereo separation: 17.2 dBf, 2.0 µV (75 ohm ) 37.2 dBf, 20 µV (75 ohm ) 2.0 dB 40 dB 85 dB 90 dB 76 dB 70 dB 55 dB 50 dB (DIN) 50 dB 0.2% 0.3% 30 Hz - 15 kHz, ±1.0 dB 45 dB at 1 kHz 30 dB at 100 Hz - 10 kHz AM Tuning range USA & Canadian models: 530 to 1,710 kHz (10-kHz steps) European & Australian models: 522 to 1,611 kHz (9-kHz steps) Worldwide models: 531 to 1,602 kHz (9-kHz steps) 530 to 1,710 kHz (10-kHz steps) Usable sensitivity: 30 µV Image re |
Date | User | Rating | Comment |