File name Panel_NEC_NL128102BC29-01C_0_[DS].pdfGlobal LCD Panel Exchange Center www.panelook.com
TFT COLOR LCD MODULE
NL128102BC29-01B
NL128102BC29-01C
48.0 cm (19.0 Type)
SXGA
LVDS interface (2port)
DATA SHEET
DOD-PD-0744 (1st edition)
All information is subject to change without notice.
Please confirm the sales representative before
starting to design your system.
Document Number: DOD-PD-0744 (1st edition) 1 NEC LCD Technologies, Ltd.
Published date: December 2004 CP(N) 2004 All rights reserved.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
NL128102BC29-01B/01C
INTRODUCTION
No part of this document shall be copied in any form or by any means without the prior written consent
of NEC LCD Technologies, Ltd. (hereinafter called "NEC").
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a product described herein or any other liability arising
from use of such application. No license, express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC or of others.
While NEC has been making continuous effort to enhance the reliability of its products, the possibility
of failures cannot be eliminated entirely. To minimize risks of damage to property or injury to person
arising from a failure in an NEC product, customers must incorporate sufficient safety measures in their
design, such as redundancy, fire-containment and anti-failure features.
NEC products are classified into the following three quality grades:
"Standard", "Special", "Specific"
The "Specific" quality grade applies only to applications developed based on a customer designated
"quality assurance program" for a specific application. The recommended applications of a product
depend on its quality grade, as indicated below. Customers must check the quality grade of each
|