File information: | |
File name: | a-60_120_spec_en.pdf [preview a-60_120] |
Size: | 227 kB |
Extension: | |
Mfg: | interM |
Model: | a-60_120 🔎 |
Original: | |
Descr: | amplifikatör |
Group: | Electronics > Automobile > Electrical diagram |
Uploaded: | 10-10-2005 |
User: | merickar |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name a-60_120_spec_en.pdf Public Address Amplifier Features · 60W/120W RMS Power at Less than 1% THD · Three Mic Inputs · Two Aux Inputs · Priority VOX Muting for Mic1 · Mono 4 or 70V/100V Outputs · Bass and Treble Controls A-60/120 70V Description The A-60 and A-120 are 60- or 120-watt public address amplifiers with three balanced Mic inputs, allowing connections of three dynamic low-impedance Mics. Both units have two aux level inputs. Priority Muting is achieved via Mic1 for overriding music for paging. Overall bass and treble controls are available on both units. Technical Specifications ELECTRICAL Rated Output (RMS) Speaker Output/Impedance A-60 60W 15.5V/4, 70V/81.6, 100V/166.7 A-120 120W 21.9V/4, 70V/40.8, 100V/83.3 Input Sensitivity/Impedance MIC 1 - 3 -60dB/600, BAL AUX -10dB/10k, UNBAL Frequency Response (±3dB) 80Hz - 16kHz THD < 1% Signal-to-Noise Ratio >50dB MIC >75dB AUX Tone Control High(10kHz) ±12dB ±12dB Low(100Hz) GENERAL Power Source 100-120VAC or 220-240VAC 50/60Hz 75W 105W Power Consumption 23.8lbs. 27.6lbs. W eight 8.9kg 10.3kg Dim ensions (W x H x D) 16.5" x 3.5" x 12.6" 420mm x 88mm x 320mm A-60/120 Architects and Engineers Specifications The public address amplifier shall be capable of 60W(A-60) or 120W(A120) RMS output power and shall provide 4 or 70/100V output. Three balanced mic inputs shall permit connections with three dynamic low impedance mics. Both units also shall have two aux level inputs. Priority Muting shall be accomplished via Mic1 to override music for paging. Overall bass and treble controls shall be provided on both units. The public address amplifier shall meet the following performance criteria: Frequency response shall be from 80Hz to 16kHz; total harmonic distortion shall be less than 1%; and signal-to-noise ratio shall exceed 50dB for Mic inputs and 75dB for Aux inputs. The power source shall be 100-120VAC or 220-240VAC 50/60Hz. The public address amplifier shall be an Inter-M model A-60 or A-120. A-60/120 Front and Rear Views Inter-M Americas, Inc. · 1 E. Beacon Light Lane · Chester, PA 19013 Tel: 610-874-8870 · Fax: 610-874-8890 · E-mail: [email protected] Website: www.inter-m.net Tel: 82-2-2289-8140~8 · Fax: 82-2-2289-8149 · E-mail: [email protected] Website: www.inter-m.com © 2004 Inter-M Specifications subject to change without notice. A6003045M Inter-M Corp. (Korea) · 653-5 Banghak-Dong · Dobong-Ku · Seoul · Korea |
Date | User | Rating | Comment |