Sony STR-DE535 free download

File name STR-DE435,DE535,SE491,V424,V525.pdf

STR-DE435/DE535/SE491/V424/V525 SERVICE MANUAL US Model STR-DE435/DE535/SE491 Canadian Model STR-DE435/DE535 AEP Model STR-DE435 E Model STR-DE435/DE535 Australian Model STR-DE435/DE535 Photo: STR-DE535 Chinese Model STR-V424/V525 Dolby Laboratories Licensing Corporation. "DOLBY" the double-D symbol a "AC-3" and "PRO LOGIC" are trademarks of Dolby Laboratories Licensing Corporation. SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 8-ohm load, both channels driven, from 20a) ­ 20,000 Hz rated 100 watts per channel minimum RMS power, with no more than 0.09%b) total harmonic distortion from 250 milliwatts to rated output. STR-SE491: a) 40Hz b) 0.5% Frequency response PHONO: RIAA equalization curve ±0.5dB (except STR-DE435) TV/SAT, CD, MD/ TAPE, VIDEO, 5.1CH/ DVD 10Hz ­ 50kHz ± 1dB Muting BASS BOOST TONE Full mute +8dB at 70Hz ±8dB at 100Hz and 10kHz Tuner section FM Stereo, FM/AM superheterodyne tuner Inputs Sensitivity Impedance 50 kilohms S/N 86dB PHONO (except STRDE435) CD, 5.1CH/ DVD, MD/TAPE, TV/SAT, VIDEO Outputs FM tuner section Tuning range Antenna terminals Intermediate frequency Sensitivity 87.5 ­ 108.0MHz 75, unbalanced 10.7MHz Mono: 18.3dBf, 4.5µV Stereo: 38.3dBf, 45µV 11.2dBf, 2µV (IHF) Mono: 76dB Stereo: 70dB Mono: 0.3% Stereo: 0.5% 45dB at 1kHz 30Hz ­15kHz +0.5 dB ­2 60dB at 400kHz Amplifier section Stereo mode STR-DE535/DE435: (8 at 20Hz ­ 20kH less than 0.09% total harmonic distortion) 100W + 100W STR-SE491: (8 at 40Hz ­ 20kHz less than 0.5% total harmonic distortion) 100W + 100W STR-DE535/435: (8 at 1kHz, THD 0.8%) Front: 100W/ch Center*: (Pro Logic Mode) 100W Rear*: 100W/ch STR-SE491: (8 at 1kHz, THD 0.5%) Front: 100W/ch Center*: 100W Rear*: 100W/ch 4mV 250mV 50 kilohms 96dB Usable sensitivity S/N Harmonic distortion at 1kHz Separation Frequency response Selectivity Surround mode and 5.1CH/DVD mode MD/TAPE REC OUT: Voltage: 250mV, Impedance: 10kilohms VIDEO AUDIO OUT: Voltage: 250mV, Impedance: 10kilohms WOOFER: Voltage: 2V Impedance: 1kilohms PHONES: Accepts low and high impedance headphones -- Continued on next page -- FM STEREO FM-AM RECEIVER MICROFILM AM tuner section Tuning range 10kHz interval** 530 ­ 1,710kHz 9kHz interval 531 ­ 1,710kHz Loop antenna 450kHz 50dB/m (at 1,000kHz) 54dB (at 50mV/m) 0.5% (50mV/m, 400Hz) At 10kHz: 40dB At 9kHz: 35dB MODEL IDENTIFICATION -- BACK PANEL -- Antenna Intermediate frequency Usable sensitivity S/N Harmonic distortion Selectivity Parts No. ** You can change the AM tuning interval between 9kHz and 10kHz. After tuning in any AM station, turn off the receiver. Hold down the PRESET TUNING+ buttoh and press the 1/u (power) button. All preset stations will be erased when you change the interval. To reset the interval, repeat the procedure. VIDEO section (except STR-SE491) Inputs Outputs VIDEO, TV/SAT, 5.1CH/DVD: 1Vp-p 75 VIDEO, MONITOR: 1Vp-p 75 General System Tuner section: PLL quartz-locked digital synthesizer system Preamplifier section: Low-noise