Tektronix TDSHT3 Source Reference free download

File name TDSHT3_Source_Reference.pdf

Getting Started with TDSHT3 4. To connect the DUT, click Tests > Connect. 8. If you have run the tests successfully, the software makes Result available automatically and displays the You can use this side of the quick reference card to get eye diagram plot and the clock jitter plot. You can also started with the Source Clock- -Data Tests Select All test view both the result summary of the test and the report procedure. The other side contains a complete menu tree for configuration in the result pane. the TDSHT3 HDMI Compliance Test Software. NOTE. For additional procedures, refer to the TDSHT3 Quick Start User Manual. For complete operating instructions, refer to the online help. 5. Make the connections as follows: TDSHT3 HDMI Compliance Test Software enables unprecedented efficiency by providing a comprehensive range of tests, including Jitter Tolerance. Start the application by using Analyze > HDMI Compliance Test 9. In the result summary pane, click Result Details to Software(1.3) or App > HDMI Compliance Test display the results of the tests. Software(1.3). Source Clock- -Data Tests Select All This option enables you to run the Eye Diagram, Duty Cycle, Rise Time, Fall Time, and Clock Jitter simultaneously. You will need one supported oscilloscope, two differential probes, one DC power supply 3.3 V, one EDID emulator, and one HDMI EFF- -TPA- fixture. -P Follow these steps: 10. In the Result Details dialog box, click Result Statistics to display statistics based on the tests. 1. On the menu bar, click Tests > Select > Source. -data tests pane, click Select All. 2. In the clock- 6. Ensure that your signal in the oscilloscope display is similar to the sample signal. Click View Waveform to display a sample of the expected signal. If the displays are not similar, go back a