File information: | |
File name: | TVP0511.pdf [preview TVP0511] |
Size: | 167 kB |
Extension: | |
Mfg: | Sony |
Model: | TVP0511 🔎 |
Original: | TVP0511 🔎 |
Descr: | Sony sony tv bulletins sony tv bulletins TVP0511.pdf |
Group: | Electronics > Other |
Uploaded: | 31-08-2021 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name TVP0511.pdf CONFIDENTIAL CSV-1 Sony Service Company National Technical Services Service Bulletin A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 TV Products Model: KP-53HS10, KP-53XBR300 No. 511 KP-61HS10, KP-61XBR300 Subject: Picture distortion occurs when connected to Date: December 6, 2000 Star Choice (HDD-201) satellite receiver. Symptom: (132X) Topside of the picture is distorted in 1080i/480p when connected to Star Choice satellite receiver into the projection TV's Video 5 input. This symptom will only occur in a component Y, Pb, Pr configuration. Cause: The HDD201 has non-standard sync pulses on the Y output signal during the vertical blanking time. These pulses effect the TV's video processing resulting in picture distortions. Solution: For both Y, Pb, Pr and RGB connection configurations, a separate H & V Sync connection cable must be used between the satellite receiver and the video 5 input on the TV. In order to correct this symptom, a standard type RCA audio patch cable may be used. (See photos below.) NOTE: The Star Choice (HDD-201) satellite receiver is designed to be sold and used in Canada only. Therfore this problem should not be seen in the USA. Picture of symptom on screen: Reference: TV2000-15 PRINTED IN USA TV Products Service Bulletin No. 511 Connection on rear side of Star Choice HDD-201: Separate H and V sync cables required to connect to KP-53HS10 and KP-61HS10 video 5 input. Connection to Rear side of HS10 model Connect separate H and V sync from Star Choice cables to KP-53 and 61HS10 video 5 input |
Date | User | Rating | Comment |