Tektronix TDSET3QuickReference free download

File name TDSET3QuickReference.pdf

Getting Started with TDSET3 3. Click 1000-T in the Speed pane or select Tests > Select 9. To measure the disturbing signal, connect the Tektronix > 1000BASE-T from the menu bar. AWG to the TC5 area of the test fixture and click You can use this side of the Quick Reference Card to get Measure. started with testing the Ethernet's physical layer for 4. From the Template/V tab, click Select All. You can olt 1000Base-T Templates. The other side contains a complete also select one template at a time to test. 10. To compensate for non-linearities in the test fixture, menu tree for the TDSET3 application. connect the DUT to the TC2 area of the test fixture and click Measure. This measures the DUT Amplitude. 11. Next, to measure the Probe Point Amplitude and NOTE. For complete operating instructions, Attenuation, connect the DUT to the TC5 area of the test refer to the application Online Help. fixture, and click Measure. Click Apply. 12. Click View Wfm from the Selection pane. If the TDSET3 Ethernet Compliance Test Software enables acquired waveform looks similar to the one displayed by unprecendented efficiency by providing a comprehensive TDSET3, continue to step 13. If the waveforms do not range of tests, including Return Loss. match, check the connection and the configuration. Ensure that the first pulse is rising. Testing 1000Base-T Templates 13. Click Run Test in the Execution pane. The application Follo