panasonic hfe sony cdj-500 service en free download

File name hfe_sony_cdj-500_service_en.pdf

CDJ-500 SERVICE MANUAL US Model Canadian Model Model Name Using Similar Mechanism NEW CD Mechanism Type CDM-56 Base Unit Type BU-24 Optical Pick-up Type SPU3212 SPECIFICATIONS CD-ROM CHANGER MICROFILM SAFETY CHECK-OUT Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. After correcting the original service problem, perform the follow- ing safety checks before releasing the set to the customer: This appliance is classified as Check the antenna terminals, metal trim, "metallized" knobs, screws, a CLASS 1 LASER product. and all other exposed metal parts for AC leakage. Check leakage as The CLASS 1 LASER PROD- described below. UCT MARKING is located on the rear exterior. LEAKAGE The AC leakage from any exposed metal part to earth Ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microampers). Leak- CAUTION Use of controls or adjustments or performance of procedures age current can be measured by any one of three methods. other than those specified herein may result in hazardous ra- 1. A commercial leakage tester, such as the Simpson 229 or RCA diation exposure. WT-540A. Follow the manufacturers' instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 Notes on chip component replacement digital multimeter is suitable for this job.