LEXMARK - OPTRA S 1250-1255-1620-1625-1650-1855-2420-2450-2455-3455 free download

File name LEXMARK - OPTRA S 1250-1255-1620-1625-1650-1855-2420-2450-2455-3455.pdf

Lexmark Optra S 4059-XXX Extracted From Service Manual 4059-XXX First Edition: September 2002 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Publications are not stocked at the address given below; requests for publications should be made to your point of purchase. Comments may be addressed to Lexmark International, Inc., D22A/035-3, 740 New Circle Road NW, Lexington, Kentucky 40550, U.S.A. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Lexmark and Optra are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © Copyright Lexmark International, Inc. 1998, 2002 All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550. 4059-XXX 7. Parts Catalog How To Use This Parts Catalog · SIMILAR ASSEMBLIES: If two assemblies contain a majority of identical parts, they are shown on the same list. Common parts are shown by one index number. Parts peculiar to one or the other of the assemblies are listed separately and identified by description. AR: (As Required) in the Units column indicates that the quantity is not the same for all machines. CC: (Color Code) in the Description column indicates the part is identified by a color marking on the part. NS: (Not Shown) in the Asm-Index column indicates that the part is procurable but is not pictured in the illustration. PP: (Parts Packet) in the Description column indicates the part is contained in a parts packet. INDENTURE: The indenture is marked by a series of dots located before the parts description. The indenture indicates the relationship of a part to the next higher assembly. For example: INDENTURE RELATIONSHIP OF PARTS (No dot) MAIN ASSEMBLY (One dot) o Detail parts of a main assembly (One dot) o Subassembly of the main assembly (Two dot) o o Detail part of a one-dot subassembly (Two dot) o o Subassembly of a one-d