File information: | |
File name: | EN - Recovery of an Azbox stuck on Booting (kernel 3.4.4.).pdf [preview EN - Recovery of an Azbox stuck on Booting (kernel 3.4.4.)] |
Size: | 2049 kB |
Extension: | |
Mfg: | AZ BOX ELITE |
Model: | EN - Recovery of an Azbox stuck on Booting (kernel 3.4.4.) 🔎 |
Original: | EN - Recovery of an Azbox stuck on Booting (kernel 3.4.4.) 🔎 |
Descr: | . Rare and Ancient Equipment AZ BOX ELITE Recovery-Blijft op Booting EN - Recovery of an Azbox stuck on Booting (kernel 3.4.4.).pdf |
Group: | Electronics > Other |
Uploaded: | 19-11-2021 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name EN - Recovery of an Azbox stuck on Booting (kernel 3.4.4.).pdf How to recover the OpenAZBox MOD kernel on an Azbox, only displaying: Booting... I ran into problems, after I installed OpenAZBox MOD firmware and wanted to go back to the RTi Core 1.6 firmware. The problem was that, at the second zboot stage, the box got stuck, due to an incorrect zboot signature. This problem started when using the latest version of AZUP, at that time 2.2.5. Connecting my receiver to my PC with a FTDI Chip TTL-232R cable, gave the following error: Checking zboot signature.. it's not zboot file. Error : Internal, code = ffffffff YAMON> In this tutorial, I'll try to explain how to revive your fooked up AZBox HD receiver. This does not apply to AZBox Me or miniME receivers. Please read the tutorial thoroughly, for it describes where to obtain the hardware and also where you can download additional needed software. This tutorial is based on my personal situation and I hope others can use it to recover their first genera- tion AZBox HD receiver. Using the manual or any flashing procedure is done at your own risk. The manual is based on the original "How to recover a blocked Azbox only displaying: Booting...". Special thanks to sattommy for his insights. Tutorial by lange for www.azboxshop.eu (versie 1.0) pagina: 1 / 29 Also available on: http://www.azbox-enigma.eu and http://www.opensat4all.com Used hardware I have used a FTDI Chip TTL-232R-5V-WE cable. This is a USB to TTL Serial cable. Just Google "Yamon cable" and lots of shops will pop up. Please look for a finished product as the image shows. Drivers: http://www.ftdichip.com Datasheet: http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf Tutorial by lange for www.azboxshop.eu (versie 1.0) pagina: 2 / 29 Also available on: http://www.azbox-enigma.eu and http://www.opensat4all.com Used software Putty. Putty is a terminal emulator which also support serial connections. Since most of us already use Putty we already have it installed. http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Download link: http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe There is no need to install Putty, simply download it somewhere on your PC and launch it. TFTP server. You will need a TFTP server on your PC, I use Pumpkin. http://kin.klever.net/pumpkin/ Download link: http://kin.klever.net/pumpkin/binaries Possible alternative: http://tftpd32.jounin.net/ Download link: http://tftpd32.jounin.net/tftpd32_download.html (this one has a 64 bits version). FileZilla You will need a FTP client: http://filezilla-project.org/ Download link: http://filezilla-project.org/download.php?type=client Tutorial by lange for www.azboxshop.eu (versie 1.0) pagina: 3 / 29 Also available on: http://www.azbox-enigma.eu and http://www.opensat4all.com The YAMON Interface The connector |
Date | User | Rating | Comment |