LG A30008~1 free download

File name A30008~1.PDF

Installation 1. Installation of indoor, Outdoor unit 1) Select the best location * Both gas and liquid interconnecting pipes must be 1. Indoor unit insulated as a pair, but it is not necessary to individually insulate them. Do not have any heat or steam near the unit. Select a place where there are no obstacles in front of the unit. 2) Piping length and elevation Make sure that condensation drainage can be conveniently routed away. Pipe Size Standard Max. Max. Additional Do not install near a doorway. Capacity Length Elevation length Refrigerant Ensure that the space around the left and right of (Btu/h) GAS LIQUID (m) B (m) A (m) (g/m) the unit is more than 5cm. The unit should be installed as high on the wall as possible, allowing 9K, 12K 1/2" 1/4" 5 7 15 20 a minimum of 5cm from ceiling. Use a stud finder to locate studs to prevent unnecessary damage to the wall. Outdoor unit More than 5cm More than 5cm A More than 2.3m Indoor unit B More than 5cm CAUTION Install the indoor unit on the wall where the height from the floors more than 2.3 meters. 2. Outdoor unit If an awning is built over the unit to prevent direct Outdoor unit sunlight or rain exposure, make sure that heat radiation from the condenser is not restricted. Ensure that the space around the back and sides A is more than 10cm. The front of the unit should Oil trap have more than 70cm of space. Do not place animals and plants in the path of the Indoor unit warm air. B Take the air conditioner weight into account and select a place where noise and vibration are minimum. Select a place so that the warm air and noise from the air conditioner do not disturb neighbors. In case more than 5m