Kyocera AS-116 free download

File name AS-116.pdf

1/2 Service Bulletin SB Number: SB AS-116 Creation Date: 25/02/2003 Subject: Usage of DF-600 on KM-5530 and KM-6330 Model: DF-600 (KM-4530 / 5530 / 6330) Please be informed that in principal the DF-600 finisher is designed for the KM-4530 and the DF-610 finisher is suitable for the KM-4530, KM-5530 and KM-6330. However, based on field requests, it has now become possible as a local solution, to use the DF-600 also on the KM-5530 and KM-6330. This is only possible in combination with a certain machine firmware level, and after making the adjustments as described later in this Service Bulletin. Please mind however that the DF-600 + KM-5530 or KM-6330 combination, is not a standard configuration and therefore does have the following limitations. IMPORTANT LIMITATIONS OF CONFIGURATION DF-600 WITH KM-5530 / 6330 1. Printing functions (punch and booklet) cannot be used. => the driver has not been adjusted to the DF-600 => the driver for the DF-610 should be used and although these printing options (punch & booklet) can be selected from this driver, they are in fact not effective for the DF-600. 2. Compared to the DF-610, the productivity / speed will go down. 3. The User manual / Operation Guide for the KM-4530 / 5530 / 6330 or DF-600 or any other related documentation will not be updated in compliance with this local solution. I. PROCEDURE DF-600 ON KM-5530 DF-600 setting Please perform following procedure on the KM-5530: Enter following simulation no. on the operation panel: 93057855 Enter simulation mode U939 and set from `Normal' --> to `600' ROM version and machine serial number The above simulation no. is available from the following ROM version and later. MAIN: 2BC2955AM MMI1: 2BC1956AM MMI2: 2BC2961AM The above ROM version is included from following KM-5530 machine serial number: KM-5530: D3005923 and higher KMIS Service Team, Kyocera Mita Europe N.A. / SB AS-116 2/2 Service Bulletin II. PROCEDURE DF-600 ON KM-6330 DF-600 setting Please perform following procedure on the KM-6330: Enter following simulation no. on the operation panel: 93057855 Enter simulation mode U939 and set from `Normal' --> to `600' ROM version and machine serial number The above simulation no. is available from the following ROM version and later. MAIN: 2CJ29049K MMI: 2CJ29058J The above ROM version is included from following KM-6330 machine serial number: KM-6330: Z3002429 and higher KMIS Service Team, Kyocera Mita Europe N.A. / SB AS-117