Kyocera SB-2J5-0023-C345 free download

File name SB-2J5-0023-C345.pdf

(Page.1/2) Service Bulletin Ref. No. 2J5-0023 (C345) December 27, 2012 Subject Shape Change of the Developer Unit Case Model FS-6950DN, FS-6970DN l: KDC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measures: Please replace the developing unit with the new one after this change when the phenomenon described below occurs. (Please distinguish the new unit by the serial number listed on the next page.) Serial Nos. of the Affected Machines: Please refer to the next page. Topic When installing the developing unit in the machine while shifting it rightwards, in a very rare case, the developer lock at the machine side might not be able to be released if the notch at the bottom of the developer case is hooked, and detachment of the developing unit might be hard. Therefore, the shape of the bottom of the developer case was changed. [Developer unit] (Bottom of the developer case) Notch Installed in the [Main unit] machine (Following is the state of installing the developing unit in the machine) Developer Notch at the bottom of lock the developing case Developing lock at the machine If the developer lock may be hooked on the notch, the release of the developer lock becomes unsmooth. [Shape change of the developer case bottom] (Old) (New) Shape to prevent the developer lock from being hooked Notch (Note) The part number of the developer unit remains unchanged. KYOCERA Document Solutions Europe Technical Customer Service Division (TCSD)