ricoh FX10 free download

File name FX10.pdf

June 10th, 1997 TROUBLESHOOTING SERVICE CALL CONDITIONS 7.4. SERVICE CALL CONDITIONS If the Call Service indicator is lit, one of the following conditions has occurred. (Please refer to the section 2-2-11 for details of the service call conditions.) Symptom Error Code Sub-code SC-code Scanner home position error 9-11 71 7-71 Charge leak current detected while the charge 9-17 11 1-11 corona unit was activated. Charge leak current detected while the charge 9-17 12 1-12 corona unit was not activated. Laser diode failure 9-20 21 2-21 Fusing unit failure (fusing lamp at high 9-22 01 0-01 temperature during printing) Fusing unit failure (fusing lamp not at printing 9-22 02 0-02 temperature after warm-up) Fusing unit failure (fusing lamp at high 9-22 03 0-03 temperature in power saver mode) Fusing unit failure (fusing lamp at high 9-22 04 0-04 temperature in power saver mode) Fusing unit failure (fusing lamp at low temperature 9-22 05 0-05 in power saver mode) Fusing unit failure (fusing lamp at low temperature 9-22 07 0-07 during printing) Fusing unit failure (fusing lamp at an extremely 9-22 08 0-08 high temperature) Fusing unit failure (thermistor error) 9-22 09 0-09 Fusing unit failure (fusing lamp at high 9-22 0A 0-0A temperature in power saver mode) Polygon mirror motor startup error 9-23 31 3-31 Polygon mirror motor error while printing 9-23 32 3-32 Main motor startup error 9-24 41 4-41 Main motor error while printing 9-24 42 4-42 To find out which problem has occurred, either: