Kyocera SB-2J0-0035-C263 free download

File name SB-2J0-0035-C263.pdf

(Page.1/2) Service Bulletin Ref. No. 2J0-0035 (C263) October 9, 2012 Measures against Damage to the Boss at the Fuser Drive Gear Subject (Prevention of Abnormal Noise) FS-2000D, FS-3900DN, FS-4000DN, FS-6950DN, FS-2020D, FS-3920DN, FS-4020DN, FS-6970DN, FS-3040MFP, Model l: FS-3140MFP, FS-3540MFP, FS-3640MFP, FS-3040MFP+, FS-3140MFP+ KMC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measure: Please replace the gear with the new one when the phenomenon described above occurs. Serial Nos. of the Affected Machines: Please refer to the next page. Topic Some abnormal noise (gear's tooth skipping noise) might be recognized while driving the machine due to the boss of the following fuser drive gears which was damaged by excessive loads in the exit unit or the fuser unit. Therefore, the following changes were made in order to increase the strength of the boss. 1. GEAR Z48H: The round shape at the bottom was changed from R0.5 to R1.0. 2. GEAR Z45S: The round shape at the bottom was changed from R0.5 to R1.0. 2. GEAR Z45S 1. GEAR Z48H X Bottom round shape changed from R0.5 to R1.0 Bottom round shape changed from R0.5 to R1.0 Bottom round shape changed from R0.5 to R1.0 Com pati- Old Part New Part Q'ty bi lity No. No. No. Description Remarks Old New Old New 302F931050 302F931051 1 GEAR Z48H 1 1 X O 2F931050 2F931051 302F931080 302F931081 2 GEAR Z45S 1 1 X O 2F931080 2F931081 KYOCERA Document Solutions Europe T