File information: | |
File name: | KOG-371G0S & 371H0S & 391G0S & 391H0S v3.pdf [preview KOG-371G0S & 371H0S & 391G0S & 391H0S v3] |
Size: | 1557 kB |
Extension: | |
Mfg: | Daewoo |
Model: | KOG-371G0S & 371H0S & 391G0S & 391H0S v3 🔎 |
Original: | KOG-371G0S & 371H0S & 391G0S & 391H0S v3 🔎 |
Descr: | Daewoo KOG KOG-371G0S & 371H0S & 391G0S & 391H0S KOG-371G0S & 371H0S & 391G0S & 391H0S v3.pdf |
Group: | Electronics > Other |
Uploaded: | 11-02-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name KOG-371G0S & 371H0S & 391G0S & 391H0S v3.pdf Service Manual Microwave Oven Model :KOG-371G0S KOG-391G0S KOG-371H0S KOG-391H0S KOG-376T1S KOG-396T1S KOG-371R0S KOG-391R0S DAEWOO ELECTRONICS CO., LTD. PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not operate or allow the oven to be operated with the door open. (b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source, and make repairs as necessary: (1) Interlock operation, (2) Proper door closing, (3) Seal and sealing surfaces (arcing, wear, and other damage), (4) Damage to or loosening of hinges and latches, (5) Evidence of dropping or abuse. (c) Before turning on power to the microwave oven for any service test or inspection within the microwave generating compartments, check the magnetron, wave huide or transmission line, and cavity for proper alignment, integrity, and connections. (d) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is released to the owner. (e) A microwave leakage check to verify compliance with the Federal Performance Standard should be performed on each oven prior to release to the owner. TABLE OF CONTENTS SAFETY AND PRECAUTIONS...2 1. FOR SAFE OPERATION ...2 2. FOR SAFE SERVICE PROCEDURES ...2 SPECIFICATIONS...3 EXTERNAL VIEW ...4 1. OUTER DIMENSION...4 2. FEATURE DIAGRAM ...6 3. CONTROL PANEL ...9 INSTALLATION ...13 OPERATIONS AND FUNCTIONS ... |
Date | User | Rating | Comment |